User manual PHILIPS SCF-314

[. . . ] For our complete catalogue of mother and babycare products We've taken everything women loved about our classic manual breast pump ­ the soft petal massager and fingertip sensitive control that make it feel so gentle, natural and comfortable ­ and we've given it an electronic memory. the twin electronic breast pump learns from you. Begin by pumping manually, then touch the button and let the twin electronic breast pump quietly continue your exact pumping rhythm. If at any time you want to vary the rhythm, touch the button again to revert to manual. [. . . ] How to assemble your pump If you are single or double pumping ­ to assemble the first pump (see diagram D): 1. With clean hands, insert the white valve (c) into the pump body (d) from the bottom making sure that the pointed side of the valve faces downwards. Twist the milk container (e) onto the pump body until securely in place. To ensure the pump doesn't topple, insert the 125ml/4oz milk container into the stand provided (f). Place the silicone diaphragm (b) into the pump body (d), making sure it fits securely around the edge, to create a seal. Carefully insert the Let-down Massage Cushion (g) into the pump body (d), making sure it completely covers the edge of the funnel. Firmly push the control handle (a) onto the pump body (d) so that it sits securely on top of the silicone diaphragm (b). If not already attached, push the transparent tube (j) securely onto the control handle (a) and click the control cable (i) into the adjacent socket. Now attach the other end of the cable into the control cable socket on the rear of the pump motor (m) and securely connect the twin tubing (k) to the ports above. You can keep the other transparent tube out of the way for now by attaching it to the white clip. Connect the wall plug lead (o) securely to the electric adaptor and then plug into an electrical wall socket. How to assemble your pump with VIA If you use the twin electronic breast pump with VIA, simply replace the bottle with the VIA adaptor and cup. Follow step 1 as before (see diagram D), then proceed to step 2 and 3 (see diagram E): 2. Twist the VIA cup (y) into the adaptor (x), then twist into the pump body (d). To ensure the pump doesn't topple, insert VIA into the stand provided (z). Then continue with steps 4-12 (see diagram D). Follow steps 1-5 as before (see diagram D), then proceed to step 6 and 7 (see diagram F). Push the double pumping connector (l) onto the 2nd pump body (d) so that it sits firmly on top of the silicone diaphragm (b). If not already attached, push the 2nd transparent tube (j) securely onto the double pumping connector (l). How to use your pump Wash your hands thoroughly and make sure your breasts are clean. Relax in a comfortable chair, leaning slightly forward (use cushions to support your back). Make sure you have a glass of water nearby as expressing can be thirsty work. [. . . ] expressed milk should be refrigerated immediately. Only milk collected with a sterile pump should be stored to be fed to your baby. Expressed breast milk can be stored in the refrigerator for up to 48 hours (not in the door) or in the freezer for up to 3 months. If you are storing freshly expressed milk in the fridge to add to during the day, only add milk which has been expressed into a sterile container. [. . . ]