User manual PHILIPS SCH530

[. . . ] Ways to use the thermometers The most convenient way to measure your baby's temperature is to use the soother thermometer in accordance with these guidelines. This method gives a reliable indication. If you need added reassurance (for example, if the first measured temperature is above 38°C) then use the digital flexible-tip thermometer to take a measurement in the anus (rectal). note that oral measurements are usually 0. [. . . ] This is also the most comfortable method for baby. Don't use for 30 minutes after the baby has had hot or cold drinks as this causes an inaccurate measurement. Place the soother in the baby's mouth and leave it there until the thermometer beeps four times. The display now shows the measured temperature and the °C sign lights continuously. Push the on/off button to switch off the thermometer. The thermometer switches off automatically after about 10 minutes. ) Checking the last measured temperature If you wish to compare temperatures then you can check to see what the last measured temperature was. This can only be done once before a new measurement. Push and hold the on/off button for about 3 seconds. the display shows the last measured temperature and an `M' for memory. When you release the button this temperature is erased. Battery low indication This soother thermometer has a long-life battery which should last for about 2 to 3 years. If the display shows a , the battery is low and the thermometer has reached the end of its useful life. Never sterilise nor boil the measurement unit. Before cleaning always remove the measurement unit from the nipple and shield as follows (see figure B): · Turn the measurement unit 90° anticlockwise with respect to the shield. Pull the measurement unit straight out of the nipple and shield. After boiling the nipple, shield and cover, drain and push out any remaining water and allow to dry. To clean the measurement unit wipe it with a damp cloth. reassemble the soother as follows (see figure C): · Align the blocks of the measurement unit with the matching slots in the back of the shield. Insert the measurement unit into the shield ensuring that the tip of the probe goes into the pocket inside the nipple. Turn the measurement unit 90° clockwise to lock into position. * Sterilising means destroying harmful bacteria at a temperature of 95°C for more than 3 minutes. [. . . ] Warning Swallowing a button battery can be extremely dangerous. dispose of battery in an environmentally friendly way. Do not dispose of in fire or it may explode. Dimensions (mm) Weight Power consumption Battery Battery life Measurement range Accuracy Nipple size If you need information or if you have a problem, please visit the Philips Web site at www. [. . . ]