User manual PHILIPS SDV2115

[. . . ] Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. Take the package to your local recycling center. Congratulations on your purchase and welcome to Philips! [. . . ] To fully benefit from the support that Philips offers, register your product at www. 1 Productoverview A VHF antenna B UHF antenna C VHF/UHF gain control knobs D Power indicator E 12 V DC connection F A/B switch G In from video/Ant H Out to TV connection I 120V AC/12V DC power adaptor, included J Low ­ High Amplifier switch K Power on/off switch STOP Before you start: For this antenna to work properly, you must access the menu on the television you are connecting this antenna to (consult your television owner's manual) then set it to receive the signal from an ANTENNA or OFF AIR instead of CABLE or SATELLITE. For best results, the antenna should be facing towards transmitter. E Tip Where possible, choose a location near a window which will give the antenna a clear view of the transmitter. 2 ConnecttoyourTV 1 Connect one end of the coaxial cable to signal output of the antenna and the other end to the input on your TV receiver. 3 Usingwithandexternalantenna orothervideosource Your antenna is equipped with a mode selector switch (A/B switch) that allows you to have more than one video source. To use your SDV2115/27 as an internal amplified TV antenna simply slide the switch to ANT position. To use an external antenna or other video source simply slide the switch to VIDEO position. If you are using the antenna with the switch in the VIDEO position, make sure that your external antenna or other video source is connected to the VIDEO input located on the back of the antenna. Yes, this antenna is capable of receiving analog television broadcasts in the UHF and VHF bandwidths. willthisantennareceivedigitalorwork withHD-ATSCbroadcasts?Yes, this antenna is designed to receive Digital ATSC and HDTV broadcasts in the UHF and VHF bandwidths. cantheantennabepoweredbyaDC powersupplyinaboat , RVorcamper?Yes, there is a DC power socket located on the back of the antenna. Plug your converter/ adapter (not included) into the antenna and then into your power source. whereshouldIplacetheantennainorder togetthebestreceptionpossible?Where possible, choose a location that is near a window which will give the antenna a clear view of the transmitter. Warranty information can be found at: www. [. . . ] Where possible, choose a location that is near a window which will give the antenna a clear view of the transmitter. Warranty information can be found at: www. Com/welcome For technical support, send us an email with the model number of the product and a detailed description of your problem to: accessorysupport@philips. For best reception you should also avoid placing the antenna on a metal surface which may cause interference. [. . . ]