User manual PHILIPS SDV2940

[. . . ] . 1 Determining signal strength Before Installation determine the best location for optimum reception. It is important for the aerial to have an unobstructed path to the transmitter. [. . . ] Certain wall materials may require different wall anchors - not included, available at any hardware store. Attach the main body and L-bracket to wall / mast mounting bracket using cross head screw (fig. 3), note the orientation of the bracket. ) Do not fully tighten this screw to allow for later adjustment (fig. 3). 2. 3. fig. 2 4 Installation 4. Tighten all screws and nuts to firmly affix the aerial to the wall. EN Attach the cable to the F connector on the underside of the unit and weather protection boot over the connection. See next steps under ­ Connections to your TV fig. 3 For outdoor mast mount installation: NOTE: Complete all assembly work on the ground. Raise the completed aerial after assembly. 2. fig. 4 Insert U-Bolts into the holes of the wall/mast bracket (fig. Slide the mast clamps onto the U-Bolts (fig. Attach the 4 nuts with lock washers to the U-Bolts - do not tighten fully (fig. Do not tighten fully, just snug enough for the assembly to stay in place (fig. Attach the L-Bracket to the wall / mast bracket using cross head screw and nut. [. . . ] Both of these cables are designed for minimal signal loss over longer cable runs. This will ensure the best possible picture and overall performance. Warranty Warranty information can be found at: www. philips. com/guarantee 6 Technical Support Technical Support EN For Technical support send an email with the model number of the product and a detailed description of your problem to: Email: accessorysupport@philips. com Printed in China 7 Specifications are subject to change without notice Trademarks are property of Koninklijke Philips Electronics N. V. [. . . ]