User manual PHILIPS SDV5122

[. . . ] (For regions with polarized plugs: To prevent electric shock, match wide blade to wide slot. ) j Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. k Only use attachments/accessories specified by the manufacturer. 4 EN l Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. [. . . ] © 2009 Koninklijke Philips Electronics N. V. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Trademarks are the property of Koninklijke Philips Electronics N. V. or their respective owners. 6 EN Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. Overview 1 2 3 4 5 6 100-240V AC 6V DC power adapter (included) VHF antenna UHF antenna 6V DC connection Signal output (for TV connection) Antenna stand EN 7 English 2 Your SDV5122 3 Get started To ensure the antenna to work properly, read the user manual of your television before you start. Set the television so that it receives the signal from an ANTENNA instead of CABLE or SATELLITE. 2 Connect the DC plug to the antenna and power supply to the 100-240V AC outlet. Installation Determine the signal strength Before Installation, determine the best location for optimum reception. It is important for the antenna to have an unobstructed path to the transmitter. For best results, ensure the antenna faces the location of the transmitter. Note · Choose a location near a window which gives the antenna a clear view of the transmitter. Note · Ensure the antenna element is properly mounted into the base and positioned on a horizontal surface. Note · Place the antenna away from the metal surface to avoid interference. Connect to the TV 1 Connect one end of the coaxial cable to the signal output of the antenna and the other end to the input on your TV receiver. 8 EN For VHF reception 1 Extend the VHF rod antenna to the longest possible length. Note 2 Turn the TV to the desired channel/ station. Move the VHF rod antenna in different directions until the reception is achieved. · To check the distance from the local TV broadcast transmitters to your location, visit www. antennaweb. org for more information. Set up a digital tuner with this antenna You can install available channels with the digital TV tuner. This automatic process is part of the setup of the tuner. Ensure the antenna has set up properly before the tuner can receive viewable channels. There are two ways to connect the antenna to the TV: For UHF reception 1 2 Turn the TV to the desired channel/ station. [. . . ] You may also have other rights that vary from state to state. Warranty information can also be found at: www. philips. com/welcome For technical support, send us an email with the model number of the product and a detailed description of your problem to:accessorysupport@philips. com EN 11 English 7 Glossary A Antenna A device, such as a rod or wire, which picks up a received radio frequency signal or radiates a transmitted RF signal. ATSC (Advanced Television Systems Committee) The Advanced Television Systems Committee, Inc. , is an international, non-profit organization developing voluntary standards for digital television. [. . . ]