User manual PHILIPS SE4352S

[. . . ] Contents 4 4 4 4 5 6 6 9 10 12 13 18 22 26 28 35 36 40 46 49 56 59 60 Important Information For your safety Installation requirements Need Help?Your SE435 Overview of the handset Overview of the base station Main features of your SE435 Connect Install Call Phonebook Call log SMS Clock & Alarm Personal Settings Advanced Settings Network Services Telephone answering machine (TAM) Troubleshooting Information Index EN 3 EN Important Information For your safety This equipment is not designed to make emergency calls in the event of a power failure. Alternative arrangements should be made for access to emergency calls. To avoid damage or malfunction: Do not allow the product to come into contact with liquid. [. . . ] Your SE435 can receive messages from 3 service centers. Each service center consists of 2 numbers: - Incoming number - Outgoing number The maximum length of an incoming/outgoing number is 24 digits. The incoming and outgoing numbers of your SE435 are already set to work on your country network. We advise you not to modify these settings. For more details or in case of any problems, please contact your local network provider. SMS reception Your SE435 can receive SMS messages from another phone if you have subscribed to CLI and SMS services from your network provider. By default, SMS reception is set to On so that you can receive SMS messages. To activate or deactivate the reception of SMS messages 1. Press m, press OK to select SMS, scroll : to SMS Settings and press OK, press OK to select SMS Reception. Scroll : to On or Off and press OK to confirm. Even if SMS reception is Off, you can still send SMS. 32 SMS SMS Box (only for UK) In order to send and receive SMS messages, there must at least be 1 SMS Box created. Box 9 with empty password is created by default. You can create a maximum of 10 SMS boxes (Box 0 to Box 9), and you can protect each box with a password. EN To create a new SMS Box (only for UK) 1. Press m, press OK to select SMS, scroll : to SMS Settings and press OK, scroll : to select SMS Boxes and press OK. Enter the SMS box name (maximum 12 characters) and press OK. You can choose to leave the password empty. If no password is required, simply press OK when prompted to enter password. If the confirmation password is correct, the new SMS box will be created. A long confirmation beep is emitted and the screen returns to SMS box list. To change the password of an SMS Box (only for UK) 1. Press m, press OK to select SMS, scroll : to SMS Settings and press OK, scroll : to SMS Boxes and press OK. Scroll : to the SMS box for which you wish to change password and press OK. Enter new password, press OK and enter the new password again for confirmation. Press OK to confirm password change. To delete an SMS Box (only for UK) 1. Press m, press OK to select SMS, scroll : to SMS Settings and press OK, scroll : to SMS Boxes and press OK. [. . . ] and press OK. The current selected language is ticked. Scroll : to your preferred language and press OK to confirm. A confirmation beep is emitted and the screen returns to previous menu. 55 EN Problem The icon is not blinking when the handset is placed on the base Troubleshooting Troubleshooting of the phone Causes · Bad battery contact · Dirty contact · Battery is full No dialling tone · No power Solution · Move the handset slightly · Clean the battery contact with a cloth moistened with alcohol · No need to charge · Check the connections. Reset the phone: unplug and plug back in the mains · Charge the batteries for at least 24 hours · Move closer to the base station · Use the line cable provided · Connect the line adaptor (when needed) to the line cord · Move closer to the base station · Move the base station at least one metre away from any electrical appliances · Register the handset to the base station · Move closer to the base station Transfer the phonebook entries that are on your mobile phone memory to your mobile phone SIM card and then to your SE435. · Batteries are empty · You are too far from the base station · Wrong line cable · Line adaptor (when needed) is not connected to the line cord Poor audio quality · You are too far from the base station · The base station is too close to electrical appliances, reinforced concrete walls or metal doorframes The icon is blinking · Handset is not registered to the base station · You are too far from the base station The copy from my mobile phone SIM card to SE435 phonebook is not complete. [. . . ]