Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PHILIPS SENSEO SELECT CSA230. We hope that this PHILIPS SENSEO SELECT CSA230 user guide will be useful to you.
Lastmanuals help download the user guide PHILIPS SENSEO SELECT CSA230.
Manual abstract: user guide PHILIPS SENSEO SELECT CSA230
Detailed instructions for use are in the User's Guide.
[. . . ] English Important safety information Read this user manual carefully before you use the machine and save it for future reference. danger - Never immerse the machine in water or any other liquid. warning - Check if the voltage indicated on the bottom of the machine corresponds to the local mains voltage before you connect the machine. - Connect the machine to an earthed wall socket. [. . . ] Check if the sealing ring of the lid is stuck under the edge of the distribution disk. If it is, pull it out from under the distribution disk carefully. Check if you have set the Intensity Plus slide to the preferred volume setting. The sieve in the center of the pod holder is clogged. CSA250, CSA240: Reset the volume settings to factory settings. Tip: before brewing coffee, preheat the cup by rinsing with hot water or brew a coffee without coffee pod. Pull up the lever and wait 24 hours before you open the lid. To prevent this from happening, make sure that the sieve in the pod holder is clean and not clogged. Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. After the flushing cycle, the machine is ready for brewing coffee. 1 Fill up the water reservoir with fresh cold tap water. 2 Place the water reservoir back onto the machine. 3 Remove the drip tray from the machine. 5 Make sure that a pod holder, without pod(s), is in place. 7 Put the plug in an earthed wall socket. 8 To start flushing, press the 1-cup button and the 2-cup button simultaneously. 9 During the flushing cycle, cold water comes out of the coffee spout. 10 When the flushing cycle is finished, the machine switches off. Caution: If you do not flush the machine before first use, your first coffee cup may overflow with cold water. brewing coffee 1 Fill up the water reservoir with fresh cold tap water. 3 To brew one cup of Senseo coffee, place the 1-cup pod holder with one Coffee pod in the machine. [. . . ] the descaling procedure consists of 4 cycles. Follow the steps below to perform the descaling procedure: prepare the descaling procedure 1 Pour half a bottle of Senseo descaler into the empty water reservoir. 2 Fill up the water reservoir with fresh cold tap water and place the water Reservoir back onto the machine. 3 Remove the drip tray and place a bowl under the coffee spout. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS SENSEO SELECT CSA230
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS SENSEO SELECT CSA230 will begin.
