User manual PHILIPS SLV5400

[. . . ] Switch on TV2. WIRELESS TV LINK RECEIVER 8 9 10 11 Switch on the receiver (B). Operate the video source with its remote control. If necessary, repeat the steps 3 to 10 for the other video sources. 6 Installation Remove interference on TV2 L Channel 1234 DC 12V EN 1 Find the CHANNEL switch on the transmitter (A). 2 Set the CHANNEL switch to different number. R CHANNEL 1 2 3 4 3 Find the CHANNEL switch on the receiver (B). [. . . ] · Make sure SCART cables are firmly inserted. · Make sure the video source is switched on. · Make sure the correct SCART input on TV1 is selected. · Select the correct video source with TV1 source. No image or wrong · Make sure SCART cables are firmly inserted. image on TV2 · Make sure the receiver (B) is connected to TV2. · Make sure both receiver (B) and transmitter (A) are switched on. · Make sure the video source is switched on. · Make sure the correct SCART input on TV2 is selected. · Select the correct video source with +/- on the receiver (B). · If the video source gives proper image on TV1: Make sure the video source gives video signal in CVBS mode. See its user manual · Change the wireless channel that is used for communication. · The receiver (B) is out of range of the transmitter (A). The number of walls and ceilings in between the receiver (B) and transmitter (A) restrict the distance. 10 Troubleshooting Problem Tip Interference in the · Slightly change the position of the receiver (B) or the transmitter (A). image on TV2 · Change the wireless channel that is used for communication. · The receiver (B) is out of range of the transmitter (A). The number of walls and ceilings in between the receiver (B) and transmitter (A) restrict the distance. The video sources · Point the remote control directly to the receiver (B). do not respond to the remote con- · Replace the batteries of the remote controls with new ones. trol commands · Install the remote control blaster from TV2 cord (G). · The maximum operating distance of the remote control is 5 m. The image of the · Turn off the auto standby mode of the video source. [. . . ] Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. 12 Information Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer. EN Glossary CVBS Easylink Video standard for showing colors on a TV. Gives a VCR or DVD recorder the possibility to automatically take over the preset programming of the TV. Separate connectors to connect audio or video equipment. [. . . ]