User manual PHILIPS SLV5405

[. . . ] In case of technical difficulties, do not open the product. Connect the power adapters only to a 220-240 V AC/50 Hz power supply. The product can cause interference to other equipment. Check if any equipment near the product can be affected before you start using it. 5 EN Installation For basic installation, see the quick start guide that came with your Wireless TV Link. Remove interference on TV3 L Channel 1234 DC 12V 1 Find the CHANNEL switch on the transmitter. [. . . ] · Select the correct video source with +/- on the receiver (A). > In combination with the SLV5400 transmitter. · If the video source gives proper image on TV1: Make sure the video source gives video signal in CVBS mode. See its user manual · Change the wireless channel that is used for communication. · The receiver (A) is out of range of the transmitter. The number of walls and ceilings in between the receiver (A) and transmitter restrict the distance. Interference in the · Slightly change the position of the receiver (A) or the transmitter. image on TV3 · Change the wireless channel that is used for communication. · The receiver (A) is out of range of the transmitter. The number of walls and ceilings in between the receiver (A) and transmitter restrict the distance. 8 Troubleshooting Problem Tip The video sources · Point the remote control directly to the receiver (A). do not respond to · Replace the batteries of the the remote remote controls with new ones. control commands · Install the remote control blaster from TV3 cord. See the user manual of the Wireless TV Link. · The maximum operating distance of the remote control is 5 m. The image of the · Turn off the auto standby mode of the video source. appears on TV3 · Follow the instructions to reconnect the video sources. Buzzing sound · Slightly change the position of the receiver or the transmitter until when you use the the buzzing sound stops. · Sometimes it is not possible to solve the problem. Black and white · Check if the SCART connector of the S-VHS VCR gives signal in image with S-VHS CVBS. VCR. EN 9 EN Information Health and safety The product transmits and receives radio waves when it is switched on. [. . . ] Gives a VCR or DVD recorder the possibility to automatically take over the preset programming of the TV. Technology based on radio frequency, used for wireless connections. Single connector to easily connect audio and video equipment. RF technology SCART 11 AQ95-56F-614KR (report No. ) EC DECLARATION OF CONFORMITY We , Philips Consumer Electronics B. V. , P&A CC: Building SBP6 (manufacturer's name) P. O. Box 80002, 5600 JB Eindhoven, The Netherlands (manufacturer's address) declare under our responsibility that the electrical product: Philips (name) SLV5405 -/00 -/05 ( Rx: SLV5405 -/00-R ) (type or model) Wireless TV link receiver (product description) to which this declaration relates is in conformity with the following standards: EN 300 440 part 1&2, (2001-9). EN 300 220-1 v1. 3. 1 EN 301 489-1 V1. 2. 1 EN 301 489-3 V1. 2. 1 EN 60065:1998 ed. 6 EN 60950:2000 (title and/or number and date of issue of the standards) following the provisions of 1999/5/EC ( R&TTE Directive) and is produced by a manufacturing organisation on ISO 9000 level. Eindhoven, 27/06/2005 (place, date) (signature, name and function) K. Rysman Approbation manager Need help? Troubleshooting See page 8 Online help: www. philips. com/support Helpline België/Belgique/Belgien Danmark Deutschland España France ÅëëÜäá Ireland Italia Luxemburg/Luxembourg Nederland Norge Österreich Portugal Schweiz/Suisse/Svizzera Suomi Sverige UK (United Kingdom) 070 222 303 ( 0. 17) 3525 8759 0900 1101211 ( 0. 12) 902 888 784 ( 0. 15) 08 9165 0005 ( 0. 23) 0 0800 3122 1280 01 764 0292 899 23 45 06 ( 0. 25) 40 6661 6544 0900 8407 ( 0. 20) 2270 8111 0900 060 827 ( 0. 20) 2 1359 1442 0900 001 600 0600 412 001 08 5792 9100 0906 1010 016 (£ 0. 15) Specifcations are subject to change without notice. [. . . ]