User manual PHILIPS SPA5200

[. . . ] > The blue light on the wired remote control comes on. Make sure that your audio source is correctly configured. Adjust the bass level with the BASS CONTROL control on the rear of the subwoofer. [. . . ] > You can now enjoy the sound of your multimedia speakers. You can connect an auxiliary audio source to the wired remote control. > The sound of the auxiliary audio source is sent to the multimedia speakers. Specifications are subject to change without notice. Trademarks are property of Koninklijke Philips Electronics N. V. 2005 © Koninklijke Philips Electronics N. V. www. philips. com 312 247 501 054 SPA5200_QSG_Single_EN. qxd 08-12-2005 11:31 Pagina 2 What's in the box? Important Safety Instructions For US/Canada only This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. 1 Read these instructions - All the safety and operating instructions should be read before the appliance is operated. 2 Keep these instructions - The safety and operating instructions should be retained for future reference. 3 Heed all warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4 Follow all instructions - All operating and use instructions should be followed. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Important notes For United Kingdom only Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse, which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. 10 How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). [. . . ] The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. 10 How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: · Connect the blue wire to the terminal marked N or coloured black. · Connect the brown wire to the terminal marked L or coloured red. [. . . ]