User manual PHILIPS SPD8025CC

[. . . ] Register your product and get support at www. philips. com/welcome SPD8010CC SPD8015CC SPD8020CC SPD8025CC SPD8030CC EN Philips NAS 1 Table of Contents Your Philips NAS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 What's in the box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Optional Components (not included). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Disable `set Clock from internet time server (NTP)' 2. Fill in the correct date and time Select accept to confirm your changes To use the internet time server : 1. Enable `set Clock from internet time server (NTP)' 2. Fill in one of the below mentioned time server addresses in the NTP server field (corresponding with your region) 3. Select accept to confirm your changes Make sure you are connected to the internet, when you use the internet time server 17 Region North America Europe: Australia: Asia Pacific NTP Server 123. 163. 4. 102 192. 5. 41. 41 192. 5. 41. 209 207. 200. 81. 113 208. 184. 49. 9 129. 132. 2. 21 130. 149. 17. 8 128. 250. 36. 3 137. 189. 8. 174 Languages To change the default language: 1. Select your language in the drop down menu 2. Select `accept' to confirm your changes. Administrator To change the default administrator password: 1. Fill in a new password in the password field 2. Retype the same password in the confirm password field 3. See `How to reset your NAS' when you have lost this password. Enable FTP Server To enable the FTP function: 1. Select `Enable FTP Server' See `Enjoy your FTP server' for more information. System management ­ LAN Setup To change the default network settings of your NAS: System Name 1. Fill in a new system name (hostname) in the System name field If you change the system name of your NAS, you need to run the Philips network storage wizard again to detect your NAS and map it. Select `Automatically assign IP settings (DHCP)' or `Manually assign IP settings' 2. When set on `manually', you can configure the fields: IP Address Subnet Mask Default Gateway DNS Server Workgroup 1. Fill in a new Workgroup in the Workgroup field 18 Enable WM5 1. Select enable or disable to activate/deactivate the Windows Mobile 5 function This enables connections to PDA's (that have Windows Mobile 5 running and are connected via WiFi to your home network). It is therefore recommended to have it standard on. Select enable or disable to activate/deactivate the DDNS function 2. When enabled configure the fields DDNS Service DDNS Username DDNS Password DDNS Host name DDNS Period For more information see `Enjoy your FTP server' System management ­ Disk Setup Here you can find disk information, such as: Volume name Status Type Total Size Free Size System management ­ Media Server (UPnP) To enable the media server function: 1. [. . . ] Connect the network cable to your NAS and to your PC / Apple Mac See chapter `Install' for instructions on how to install your NAS on PC / Apple Mac Enjoy your NAS as external storage device How to enjoy your NAS (without a wizard) 1. Go to Windows Explorer Select `Tools' Select `Map network drive' Check the label on the back of the NAS for `NETBIOS' The `NETBIOS' name is unique for each network device. 29 5. Enter `\\' followed by the `NETBIOS' name you found in the previous step in the folder field. (example : \\spd8020-A89205) Select `Reconnect at logon' to reuse this mapping after restarting your computer Click `Finish' 6. 7. 30 Maintenance Firmware update CAUTION 1. Never turn off your NAS during the firmware update procedure. [. . . ]