User manual PHILIPS SPP4068A

[. . . ] ⷠConsult the dealer or an experienced radio/TV technician for help. Not for use outdoors or in other wet or damp areas, with aquariums, in hazardous environments requiring failsafe performance (such as nuclear facilities or aircraft), or for medical or life support equipment. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. [. . . ] Splitter phone line protection If you have one telephone number for both your modem and telephone, you can split the incoming phone line into two outs: 1 Connect your phone/fax/modem line to the input jack IN on the surge protector. 2 Connect one end of a phone cord into the output jack OUT on the surge protector, and the other end to the phone/fax/ modem jack of device. Some Philips surge protector models come with USB ports. You can charge your smart phone or other USB devices through the USB ports on your surge protector. 1 Connect one end of a USB cable to the USB port on the surge protector. 2 Connect another end of a USB cable to the USB device. eN 5 English 3 Get started Connect the surge protector to a phone/fax/modem Note · You cannot use the modem and phone at the same time. conditions for damage claims · To claim damage under the connected equipment warranty as a result of telephone service line transients, ensure the equipment is properly connected to a Philips surge protector which offers telephone line protection. Also, ensure the telephone service equipment has included a properly installed and operating primary protection device at the service entrance (such devices are normally added during telephone line installation). If you fail to connect the phone/fax/modem protection, your connected equipment will not be covered by the connected equipment warranty. Most modem damage can be prevented if you connect the phone/fax/modem protection carefully and properly. Surge protector models with telephone protection are designed to provide maximum protection from surges present on standard two wire dial-up telephone service. Other communication networks which use modular jacksarenotnecessarilybenefitfromthis protection. caution · The telephone feature of this product could be rendered inoperable if improperly installed. A connection directly from your TV/VCR/ DVD/satellite/cable box to the wall jack, pass the connection through the protected coaxial connections on your surge protector. 1 Connect your incoming cable/broadband line to the input coaxial connector on the surge protector. 2 Connect one end of a coaxial cable to the output coaxial connector on the surge protector, and the other end of to the input coaxial connector of the device. To claim damage under the connected equipment warranty as a result of coaxial line transients, ensure the equipment is properly connected to a Philips surge protector which offers coaxial line protection. If you fail to connect the coaxial cable protection, your connected equipment will not be covered by the connected equipment warranty. Most TV/VCR/ DVD/satellite/cable box damage can be prevented if you connect coaxial cable protection carefully and properly. [. . . ] Consumer agrees to provide insurance information to Philips, at its request; and after a claims settlement, if applicable, Philips reserves the right to be subrogated under any existing warranty from the manufacturer of the connected equipment or under any existing insurance policies the claimant may have. This warranty is limited to surge protectors which indicate on the packaging an accompanying connected equipment warranty. Afteranyrepairormodificationofthesurge protector by a facility not authorized by Philips, any problems that arise will not be remedied under this warranty. Your Philips surge protector must be plugged into a properly grounded outlet. [. . . ]