User manual PHILIPS SRP620NC

[. . . ] To access some of the functions you have to use the SHIFT mode in combination with another key. The PIP mode will now be activated and the Shift light stops blinking. To control a Philips DVD or VCR you have to press the Mode key twice briefly. The DVD/VCR light will turn on, indicating that you have selected the DVD/VCR mode. [. . . ] solution: · Make sure the remote control is in TV mode (both Mode lights must be out). Press and hold the OK button and digit 2 simultaneously for 5 seconds till the mode lights blink twice. Instructions for use TV is not responding to any key If your TV is purchased after 1999, it is possible that it uses the new RC6 remote control code. solution: · Make sure the batteries are inserted as indicated in chapter 1. Make sure the remote control is in TV mode (both Mode lights must be out). Press and hold the OK button and digit 3 simultaneously for 5 seconds till the mode lights blink twice. The Active control, smart sound and smart picture keys are not working In some TV sets are different commands used. solution: · Make sure the remote control is in TV mode (both Mode lights must be out). Press and hold the OK button and digit 5 simultaneously for 5 seconds till the mode lights blink twice. The Active control key is not working In some TV sets a different command is used for this function. solution: · Make sure the remote control is in TV mode (both Mode lights must be out). Press and hold the OK button and digit 4 simultaneously for 5 seconds till the mode lights blink twice. The Smart sound and Smart picture keys are not working In some TV sets are different commands used for these functions Solution: · Make sure the remote control is in TV mode (both Mode lights must be out). Press and hold the OK button and digit 8 simultaneously for 5 seconds till the mode lights blink twice. Please read the steps below if you want to select VCR or DVD-recorder functions. 5 seconds, until the mode lights blink twice. If you want to operate a Philips DVD-recorder do the following: 1 Select the DVD/VCR mode by pressing once on the mode key at the side. 5 seconds, until the mode lights blink twice. In case you have more than one VCR or DVD from Philips, you might have choosen the option to change the RC system of the VCR or DVD. If the DVD, DVD-R or VCR functions as described above don't work, you can try the following: For VCR system 2: 1 Select the DVD/VCR mode by pressing once on the mode key at the side. [. . . ] If you have any questions about the SRP620, call our special helpline, You will find the telephone number on page 2 of this manual. Read this manual carefully before you make a call. You can solve most of the problems yourself. If you cannot find any answers to your problems, write down the details of your TV, DVD or VCR. [. . . ]