User manual PHILIPS SRU 7060

[. . . ] When you stop rotating, the touch screen and the hard keys will work for that selected device. The most frequently used functions of your devices are covered by these touch screen keys and hard keys. On the touch screen, you see only the functions that are applicable for the selected device. Press the Page 2 key at the bottom of the touch screen for more functions. [. . . ] You can add up to 8 devices from the list of available devices. Once you have added a device to your remote control, it will disappear from the list. However, the list of devices contains `TV-2' or `VCR-2' when you want to program a second TV or a second VCR. You can select the device by turning the rotary wheel. The touch screen keys will appear for the selected device. An activity is sequence of key presses that you can program. For example, to watch a DVD you normally would have to: You can delete a programmed device from your remote control. The deleted device will be available again in the list of devices you can add. Check the activities you programmed and Volume keys for your devices and reprogram them if necessary. If a hard key, touch screen key or extra function is not working properly with your device, you can learn the key from your original remote control in your SRU9600. Select the device for which you want to fix a key. After 5 seconds, these components are switched off again. You can change this time out to one of the following options: The time out will be changed for your remote control. The longer the backlight stays on, the faster the batteries will be drained. After devices have been added, the SRU9600 automatically copies the Volume keys, as follows: Video devices, such as DVD, DVDR, VCR and Satellite box, use the Volume keys of the TV (provided that you have programmed a TV). Audio devices, such as CD, MD, Tape and Tuner, use the Volume keys of the Amplifier or Receiver (provided that you have programmed an Amplifier or Receiver). You can change which Volume keys are used, for instance when you want to use the Volume keys of the Amplifier for the DVD. Select the device from which you want to copy the Volume keys (e. Select the device to which you want to copy the Volume keys (e. Confirm that you want to copy the Volume keys from one device to the other. You can reset the SRU9600 completely, deleting all programmed devices, activities, learned keys and other settings. After the reset, you will have to reinstall your remote control. [. . . ] This warranty does not extend to the product if damaged or rendered defective because of misuse, accident, unauthorized repair, modification or other cause not within the control of Philips Consumer Electronics. replacement as provided under this warranty is the exclusive remedy for the consumer. Philips shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on this product. Except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this product is limited in duration to the duration of this warranty. [. . . ]