User manual PHILIPS SRU1020

[. . . ] If the TV responds as it should to all of the key commands the SRU 1020 is ready for use. If the device does not respond at all or not to all of the key commands, follow the instructions under `Setting the remote control' or for online setup got to: www. This is only necessary if your device does not respond to the SRU 1020. If that is the case, the SRU 1020 does not recognize the brand and/or model of your device and you need to program the SRU 1020 to do so. [. . . ] The illustration on page 3 gives an overview of all keys and their functions. You can select the device you wish to operate with the TV and DVD selection keys. each key allows operation of one device only. If desired, you can program the keys to select a different kind of device. For example, if you want to operate a second TV. In the following example you will see how to configure the DVD key for a second TV. Keep keys s and E on the SRU 1020 pressed simultaneously for 5 seconds, until the DVD key lights up. The DVD key will now allow you to operate your second TV and the DVD device mode will be deleted. If the DVD key blinks once for a longer period of time, adjusting device selection failed. The FAVORITES keys (A, B, C, D and E) are default set to select the first five channels on your TV. If you wish to prevent your children (or others) from zapping through all available TV channels, you can activate the child lock function. Only the channels stored under the FAVORITES keys are then accessible via the FAVORITES and + PROG ­ keys. ENGLISH Keep keys 5 / A and 6 / C pressed simultaneously for 3 seconds to activate the child lock function. Keep keys 9 / D and ; / E pressed simultaneously for 3 seconds to deactivate the child lock function. Storing favorite TV channels/Learning keys The FAVORITES keys (A, B, C, D and E) are default set to select the first five channels on your TV. If you wish, you can reassign these keys to another function. You can store other (favorite) TV channels under them or learn the keys functions from your original remote control that you miss on the SRU 1020. The example below (reassigning the E key for TV) instructs you how to do this. Make sure you have the original TV remote control at hand. Keep keys E and TV pressed simultaneously for 5 seconds until the TV key remains lit. A table) and aim them head-to-head with about 5-10 cm in between. Storing favorite TV channels On the original remote control: enter the favorite station number (e. [. . . ] Revert the SRU 1020 back to the factory default settings in order to create memory space. see `Restoring the original functions of your remote control'. The SRU 1020 stopped the learning / programming process after 30 seconds for no IR signals were received. Se till att du har den ursprungliga fjärrkontrollen för din videobandspelare till hands. [. . . ]