User manual PHILIPS SRU5130

[. . . ] Example of TV: 1 Turn your TV on manually or use the original remote control. If the key does not light up, check whether the batteries are properly inserted (see `2. 3 For an overview of the keys and their functions see `3. If the TV responds as it should to all of the key commands the SRU 5130 is ready for use. [. . . ] Press and hold the Stand-by key of the SRU 5130 until your TV switches off (stand-by). The SRU 5130 is now set to operate your TV. Full search setup takes about 5 minutes. The illustration on page 2 gives an overview of all keys and their functions. Used in text mode and in some on-screen menus. 5 Cursor keys cursor up, down, left, right in a menu. 9 Numeric keys direct choice of channels and other functions. 10 A/V switches between external inputs of your equipment. 12 / selects between one- and two-figure channel numbers (TV, STB). Jumps back one level in the menu or turns off the menu. Light up when a remote control command is sent to the selected device. Note If the device does not respond at all, or not to all of the key commands, follow the instructions under `2. You can select the device you wish to operate with the TV, STB and DVD keys. Each mode key allows operation of one device only. If desired, you can program the keys to select a different kind of device. For example, if you want to operate a second TV. In the following example you will see how to configure the DVD key for a second TV. Then keep keys 1 and 6 on the SRU 5130 pressed simultaneously for three seconds, until the DVD key lights up. Press the key until it flashes twice and then remains lit. The DVD key will now allow you to operate your second TV. Restoring the original functions of your remote control Keep keys 1 and 6 on the SRU 5130 pressed simultaneously for three seconds, until one of the mode keys (TV, STB or DVD) flashes twice and then remains lit. All original functions have now been restored and any extra functions have been deleted. [. . . ] Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 1902/96/EC. please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. [. . . ]