User manual PHILIPS SRU540

[. . . ] Because the SRU540 may use different signals for each brand and even for different models of the same brand, it is advisable to test whether your device responds to the SRU540. The example below (TV) instructs you how to do this. You can repeat the same steps for other devices (DVD player/recorder, video recorder, etc. ) which you want to operate using the SRU540. Example of TV: 1 Turn your TV on manually or use the original remote control. Tune to channel 1. SRU540_05_English_versie_6. qxd 26-04-2005 14:40 Pagina 5 Instructions for use English 5 2 3 ­ Press the SELECT key to select TV. Press the key until TV lights up in the selector window. [. . . ] Press the key until TV lights up in the selector window. 4 Keep keys 1 and 3 pressed simultaneously for five seconds until TV in the selector window flashes twice and then remains lit. 5 ­ 6 ­ Then enter the code noted in step 2 using the digit keys. TV in the selector window will now flash twice. If TV flashes once for an extended period, the code has not been entered properly or the wrong code has been entered. Point the SRU540 at the TV and check that it responds as it should. If the TV responds to all of the key commands, the SRU540 is ready for use. Do not forget to note your code. SRU540_05_English_versie_6. qxd 26-04-2005 14:40 Pagina 7 Instructions for use English 7 · If the device does not respond at all, or not to all of the key commands, start again from step 2 and try the next code from the list. 3. Keys and functions The illustration on page 3 gives an overview of all keys and their functions. - teletext on/off ( ); - text off ( ); - wide screen TV ( ); - subtitle ( ); - text hold ( ). switches between external inputs of your equipment. direct choice of channels and other functions. When pressed at the same time as a second key, the second key will get another function. All blue labelled keys can be used together with SHIFT. stores TV settings Try out other combinations with the SHIFT-key on your device in order to find out which functions are available. Only functions featured on the original remote control are available. - red teletext key - rewind (VCR/DVD) 2 . - blue teletext key - wind (VCR/DVD) 9 . - green teletext key - stop (VCR/DVD) 0 . - yellow teletext key - pause (VCR/DVD) !selects between one- and two-figure channel numbers. selects a previous or following channel. jumps back one level in the menu or turns off the menu. If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the Subtitle key for this. [. . . ] Try programming the SRU540 again using another code, which is mentioned under the brand of your device, or reset for automatic search to find the right code. If the device still does not respond, call our helpline. Find out whether your TV is equipped with Teletext. You have difficulties operating all of the functions on your device. [. . . ]