User manual PHILIPS SRU740

[. . . ] The example below (TV) instructs you how to do this. You can repeat the same steps for other devices (DVD, video recorder, etc. ) which you want to operate using the SRU740. Example of TV: 1 Turn your TV on manually or use the original remote control. [. . . ] Then enter the code noted in step 2 using the digit keys. If the LED flashes once for an extended period, the code has not been entered properly or the wrong code has been entered. If the TV responds to all of the key commands, the SRU740 is ready for use. If the device does not respond at all, or not to all of the key commands, start again from step 2 and try the next code from the list. The illustration on page 3 gives an overview of all keys and their functions. 2 Indicator LEDs 3 - teletext on/off (disc menu) - text off - index - play (VCR/DVD) - text hold - record (VCR/DVD) - wide screen TV - red teletext key - rewind (VCR/DVD) - green teletext key - stop (VCR/DVD) - yellow teletext key - pause (VCR/DVD) - blue teletext key - wind (VCR/DVD) 4 MENU . Switches between external inputs of your equipment. - direct choice of channels and other functions. - source selection keys in amplifier mode (together with SHIFT). Try out other combinations with the Shift-key on your device in order to find out which functions are available. Only functions featured on the original remote control are available. When pressed at the same time as a second key, the second key will get another function. Jumps back one level in the menu or turns off the menu. If you use the (fi) 'memory off' key to get to the next teletext page on your Philips TV, you can press the Subtitle key for this. If the device does not respond at all, or not to all of the key commands, follow the instructions under `Setting the remote control'. It is possible that you must enter another code for the device. You can select the device you wish to operate with the SELECT key (mode selector). each option allows operation of one device only. If desired, you can program the SELECT key (mode selector) to select a different kind of device. For example, if you want to operate a second TV. In the following example you will see how to configure the SAT mode for a second TV. Press the key until the SAT LED lights up. [. . . ] You can solve most of the problems yourself. If you cannot find any answers to your problems, write down the details of your device shown in the code list at the back of this manual. This will help our operators to assist you better and more quickly. Look up the numbers of the models in the instructions accompanying the device or on the back of your device. [. . . ]