User manual PHILIPS TD6120-GH051P

[. . . ] To be able to make calls in the event of a power cut, it is recommended that this telephone be used as a complement to another telephone which does not require mains power. TELEPHONE CONNECTION: The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard EN 60-950). SAFETY PRECAUTIONS: Do not allow the handset to come into contact with water. Do not open the handset or the base station. [. . . ] FITTING THE COLOUR CLIP 1 Insert the clip from the top first. 2 Firmly press on the clips (in the arrow direction) until they lock. 3 To remove the colour clip, pull it out from the Philips marking. 3 DESCRIPTION HANDSET DISPLAY Numerical characters Telephone icons ICON STATE Displayed Batteries charged. Blinking Displayed Blinking Displayed Displayed Blinking Displayed Blinking Displayed Not displayed Blinking DESCRIPTION Handset being charged. Waiting for an answer from the base station (in the context of registration). Memories in use (consultation, programming). Handset in receiving mode (connected to the base station). Handset out of range of the base station. Base station not connected to power supply. Handset not registered with the base station. 4 DESCRIPTION TELEPHONE LEDS The base station has a green LED: - Lit, when the base station is powered. the line is connected or the answering machine is replying. - Unlit, when the base station is not connected to the power supply. AUDIBLE SIGNALS Your telephone emits: - 1 short beep - 1 long beep - 2 beeps - 3 beeps = when you press a key. = when these is no contact between the handset and the base station any other problem occurs (if you make a mistake). = to indicate that the handset needs to be recharged = when you place the handset on the base station. = confirming the programming you have entered. = in the programming phase, inviting you to continue with the procedure. RINGER EQUIVALENCE NUMBER OR REN (UK ONLY) Your has a Ringer Equivalence Number (REN) of 1. 0. To determine the maximum number of telephones that can be connected to your line, add together the individual RENs of all the apparatus you wish to connect. If this total exceeds four, one or all of your telephones may not ring correctly. 5 USING YOUR TELEPHONE Your Philips telephone is GAP certified, nevertheless we cannot guarantee its use with DECT products made by other manufacturers. You can register 4 handsets with 1 base station and 1 handset with 2 base stations. TO MAKE A CALL TO ANSWER A CALL Dial the number Speak Hang up Connect the line The duration of the call is displayed. Your telephone rings Conned the line The duration of the call is displayed. TO REDIAL THE LAST NUMBER Speak Hang up Connect the line Hang up Press the Speak Redial key* * The last telephone number dialled is displayed and the call made. [. . . ] plugged in correctly or there is a power cut. No audible signal is transmitted when you place the handset on the base station. The charging contacts are not making contact. u The charging contacts are dirty. u Pick up the handset and the replace it. [. . . ]