User manual PHILIPS TD6523-BB051P

[. . . ] To be able to make calls in the event of a power cut, it is recommended that this telephone be used as a complement to another telephone which does not require mains power. TELEPHONE CONNECTION: The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages, as defined in the standard EN 60-950). SAFETY PRECAUTIONS: Do not allow the handset to come into contact with water. Do not open the handset or the base station. [. . . ] the line is connected or the answering machine is replying. - Unlit, when the base station is not connected to the power supply. Red LED - Lit, when the answering machine is ready to receive calls (ON). - Blinking slowly, indicating the number of messages received (up to 3). - Blinking rapidly, your answering machine is full. AUDIBLE SIGNALS Your telephone emits: - 1 short beep - 1 long beep = when you press a key. = when there is no contact between the handset an the base station or any other problem occurs (if you make a mistake). = to indicate that the handset needs to be recharged. - 2 beeps = when you place the handset on the base station. = confirming the programming you have entered. - 3 beeps = in the programming phase, inviting you to continue with the procedure. Your answering machine emits: - 1 long beep = inviting the caller to record a message. = no Outgoing Message when you switch your answering machine ON = memory full when you attempt record a memo or switch your answering machine ON. - 2 beeps = indicating that all the messages have been read. - 3 beeps = inviting the user to record a memo or an announcement locally. - 1 beep = inviting you to dial the remote playback code. RINGER EQUIVALENCE NUMBER OR REN (UK ONLY) Your has a Ringer Equivalence Number (REN) of 1. 0. To determine the maximum number of telephones that can be connected to your line, add together the individual RENs of all the apparatus you wish to connect. If this total exceeds four, one or all of your telephones may not ring correctly. 5 USING YOUR TELEPHONE Your Philips telephone is GAP certified, nevertheless we cannot guarantee its use with DECT products made by other manufacturers. You can register 4 handsets with 1 base station and 1 handset with 2 base stations. TO MAKE A CALL ð TO ANSWER A CALL Dial the number ð Speak ð Hang up Connect the line The duration of the call is displayed ð Your telephone rings Connect the line The duration of the call is displayed TO REDIAL THE LAST NUMBER ð Speak ð Hang up ð Connect the line Press the Redial key* ð Speak ð Hang up * The last telephone number dialled is displayed and the call made. TO ACTIVATE THE LOUDSPEAKER Your telephone base station is equipped with a loudspeaker so that people in the room with you can also listen to the conversation. [. . . ] Delete messages to free sufficient memory. Delete messages to free sufficient memory. Delete messages to free sufficient memory. u The answering machine has not The memory is full. The answering machine has The memory is full. [. . . ]