User manual PHILIPS TD6822

[. . . ] Alternative arrangements should be made for access to emergency services. This product may be used legally only in a country where the appropriate authority has given its specific authorisation. This authorisation appears on a label under the base station. The marking on the product certifies its conformity to the technical regulations for user safety and electromagnetic disturbance which were applicable on the date of approval in accordance with European Union directive No. [. . . ] The charging unit must be placed on a flat surface. Avoid placing the charging unit: - in a damp room, - near a heat source, - near obstacles like thick walls or metal structures. INSERTING / REPLACING THE BATTERIES Your handset is powered by 2 rechargeable AA/R6 batteries. If you need to replace them, you should use PHILIPS R6 NC-P or Saft RC6 batteries. 1 ð Press the top of the battery cover and slide it downwards. 2 ð Insert the batteries, taking care to respect the marked polarities. The batteries contain Cadmium and should be disposed of in accordance with the regulations in force concerning the disposal of waste. The manufacturer disclaims all responsibility if these recommendations are not respected. 1 ð Fix the screws (not supplied) as shown in the diagram. 2 ð Connect the power supply cable to the charging unit. 3 ð Mount the charging unit on the screws. 4 ð Plug the mains adaptor into the wall socket. 5 ð Place the handset on the charging unit. Only use the cables supplied with the product. Cd WALL MOUNTING THE CHARGER UNIT 12 DESCRIPTION HANDSET DISPLAY ICON STATE Displayed Blinking Displayed Blinking Displayed Displayed Blinking Displayed Blinking Displayed Not displayed Blinking Batteries charged Batteries low DESCRIPTION Handset being charged Programming activated Waiting for an answer from the base station (in the context of registration) Memories in use (consultation, programming). External call in progress External call arriving. Internal call arriving (connected to the base station). Handset out of range of the base station Base station disconnected. Handset not registered with the base station. and ), refer to the main base station User's Guide. For more details on the other functions ( 13 English Numerical characters Telephone icons USING YOUR TELEPHONE Your Philips telephone is GAP certified, nevertheless we cannot guarantee its use with other DECT products made by other manufacturers. You can register 4 handsets with 1 base station and 1 handset with 2 base stations. [. . . ] FUNCTION Melodies KEY COMBINATIONS ACOUSTIC FUNCTIONS u COMMENTS + + + + + + + + + + + + + + + + + + + + + Option no. 3 Low Mid High Low Mid High u Handset melody volume + + + u Earpiece volume + + + REGISTERING/UN-REGISTERING A HANDSET TO A BASE STATION Before registering a handset, unplug the base station mains adapter and then plug it in again. u Register this handset Un-register this handset + + + Code + + Code + u The code is indicated on the label on the bottom of the base station (4 digits). , 16 For handsets from other manufacturers or for models other than the please refer to the your base station user manual. PROBLEMS YOU MAY ENCOUNTER WITH YOUR TELEPHONE The table below lists the problems you may encounter when using your Philips telephone. There is no dialling tone. u The base station has not been connected to the telephone line correctly. You are too far from the base station. u Check the connections (see page 16). [. . . ]