User manual PHILIPS TD9363

[. . . ] Listening to incoming messages The display will flash, indicating the number of new messages stored. 1. The messages will playback from first one recorded to the last one recorded. If you wish to repeat the message, press . If you wish to skip the message, press 4. [. . . ] During recording, the telephone line must be inactive and the machine must be in Answer Off mode. 1. Press Answer Mode Button to Answer Off mode and the Answer Off Indicator is light up. After the beep and the displays shows "uc", speak your memo. Press Play/Stop or Record button to stop recording. After the rotating "uc" stops, the memo will playback. Press Answer Mode Button once or twice to restore to previous setting. Press [1] to switch to Answer Record mode. Press [4] to record a new Answer Record message or to stop recording Press [5] to record a new Answer Only message or to stop recording Press [6] to activate the room monitoring function. Press [8] to stop/playback messages or to return to first set of commands. Press Press [#] to exit the remote control functions. Thank you for purchasing this digital answering system with voice prompt. You are guaranteed to experience the efficiency and quality set by Philips standard. In this package you will find the following: · one base unit · one user manual · one line cord · one ac adaptor · one remote control card Begin the MENU Set Up ELEGANCE 66 is designed with full PLUG & PLAY intelligence to take care of the incoming messages once connected. Please also refer to the section: Select Your Answering Mode. It is recommended to turn on the clock and check the pre-setting. Before you begin: please ensure the volume is set to maximum. To begin, please press MENU: Setting the Ringer On/Off ELEGANCE 66 provides two extra pre-recorded and one user programmable ringer for the incoming calls. This feature takes over th ringer of your telephone. Select your answering mode ELEGANCE 66 is defaulted to answer and record incoming calls, Answer/Record mode. To hear the default Outgoing Message (OGM), press the MODE key until the display shows "A1" and the Answer/Record Indicator is light up. To switch the ringer on: MODE MENU Or MENU MENU . . . ANS/REC ANS ONLY ANS OFF Feature list of the equipment 1. Answer Only Indicator 14. Answer Off/ Memo Recording Indicator 15. Volume Control MENU Or To select setting MENU Or To exit form MENU To confirm setting 1. From the previous setting, or press until hear the VoiceHelp: 2. or then the display will show "On" 3. Press to confirm and go to next setting. MENU Ringer OFF ANS/RE Thank you for calling. There is no one to answer your call now. [. . . ] You will hear the recorded outgoing message playback. To record again, press and repeat step (2) to (4). Then the pre-recorded outgoing announcement 8. To erase, press will be resumed and played back. MODE RECORD Setting Answer Delay To set the number of rings before the Answering Machine picks up the call and announces the Outgoing Message. Setting the Remote Code When using the answering machine for the first time, the remote code is "0000". [. . . ]