User manual PHILIPS TSU9600/37B

[. . . ] The panel connector is clean and free of obstructions. iIt is recommended that the Control Panel be placed in the docking station after use. The Control Panel still consumes power even while its screen has turned black. Tap the touch screen with the stylus included with the Control panel or with your finger. [. . . ] Do not use this function unless you experience problems with the touch screen. Take care not to damage the touch screen ⷠDo not drop the Control Panel or subject it to heavy impact. ⷠUse the stylus included or your finger to tap the touch screen. Attention In order to avoid scratching the touch screen, never use an actual pen, pencil or other sharp object on it. Protect the Control Panel from extremes of temperature Keep the Control Panel away from heaters and other heat sources. The Control Panel must not be exposed to rain or moisture. Do not store or use the Control Panel in any location that is extremely damp or wet. If you have spilt water on the Control Panel, you must turn it off by switching the Power switch to 0. Use a soft, damp cloth to clean the Control Panel. ⷠIf the touch screen is dirty, clean it with a soft cloth moistened with a diluted window-cleaning solution. The buttons on the touch screen of my Control Panel do not work properly If you find that tapping a button activates one of the adjacent buttons, or if you have to tap next to a button to activate it, it is recommended that you recalibrate the touch screen as described in `Changing the Pronto Settings' on page 8. Calibrating is a way of adjusting the touch screen to regain accuracy and reliability. This is a timeout feature of the Control Panel to save power. My AV equipment does not respond to commands from the Control Panel When your Control Panel is operating in a WiFi environment, bear in mind that it may take the network a few seconds to wake up and start transmitting codes. ⷠYou may be out of reach of the WiFi network. WiFi activity icon shows no WiFi strength Note The WiFi activity icon may not be visible on screen, depending on the settings made by your installer. If the Control Panel shows one of the following icons: No connection · If the problem comes up regularly, contact your installer to change the settings. My Control Panel rapidly runs out of power ⷠBear in mind that the Control Panel is still using power when operating in a WiFi environment, even while its screen is black. [. . . ] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rule. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]