User manual PHILIPS TU5350/BA011P

[. . . ] If you register the additional handset to a Philips Onis 300 or Onis 380 base station, the handset will have all the features described in the corresponding complete set user guide. If you register the additional handset to a Philips Onis 200 or Zenia base station, only a limited number of menus will be available. To register the Philips additional handset to a non-Philips base station, follow the base station instructions described by the other manufacturer. then follow the instructions on page 4 to register the Philips additional handset. [. . . ] When reaching the range limit, the conversation will become crackly, get closer to the base station otherwise you will be cut off. To reach optimal range place the base station far from electrical appliances. From idle screen, to access the carousel menu press The carousel represents a loop of icons that gives access to the first menu level. Scroll up or down to reach the desired menu. The sub menus are listed and represented by little squares at the bottom of the display. To reach one particular sub menu scroll and validate your choice A shows the sub-menu or option you are browsing. a shows the selected sub-menu or option. Note : Certain menus are directly accessible via a dedicated key on the keypad (example the Call log ) Voice dialling 1- Press 2- Say the voice tag 3 The additional handset will get full capability when it is registered to the base station*. you can register up to 8 handsets to the Onis 300 & 380 base stations. To register an additional handset Place the base station in Registration mode as follows : 1- Unplug and plug back in the mains lead 2- With the additional handset press to start the registration 3- Enter the 4-digit RC code written on the sticker placed under the base station. The ringers can be set for : - The external standard ringer for callers whose number is not stored in the phonebook or stored with no VIP settings. - The internal ringer for the intercom (if there are at least 2 handsets). To set the ringer type 1- Go to Handset, validate 2- Select Sounds, validate 3- Select Ringer type, validate 4- Choose External Std ringer/Internal ringer, validate 5- Select the ringer from the list and validate To set the ringer volume on the handset There are 5 ringer volume levels. 1- Go to Handset, validate 2- Select Sounds, validate 3- Select Ringer volume, validate 4- Choose the appropriate volume level and validate NB :The vibration call Alert is only available for Onis 380 4 Handset To set the key tones & feedback tones Audio feedback heard when pressing the keys & validating a setting Resume from step 1-2 above 3- Scroll to Key and feedback tones, validate 4- Select ON/OFF and validate To set the notification beep Audio indicators heard when there is new SMS or a new message Resume from step 1-2 above 3- Scroll to Notification beep, validate 4- Select ON/OFF and validate Place the handset in the room to be monitored and you will hear the noise on the additional handset. To activate/deactivate the babysit mode 1- Go to Handset, validate 2- Scroll to Babysit mode, validate 3- Select ON/OFF and validate Note : An intercom is necessary to monitor the room (See page 6). To change the language 1- Go to Handset, validate 2- Scroll to Language, validate 3- Select the language and validate Warning : Changing the language will not alter the voice prompts of the answer machine (Onis 300 Vox/Onis 380 or non-Philips base stations). Using the intercom (if there are at least 2 handsets) This feature allows to make internal calls, activate babysit or transfer external calls from one handset to the other. the intercom is possible with handsets registered to the same base station. Internal call or room monitoring activation 1- Go to Intercom, validate 2- If there is only one handset it rings automatically. Otherwise select from the list the handset/base you want to call and Call The called handset/base rings 3- Take the line on the called handset/base. The intercom conversation or the babys room monitoring can start. Note :You can access the Intercom with the pilot key. [. . . ] Wait until it is available The base is being consulted An error beep is heard Move closer to the base The handset is out of range. The ringer is deactivated The procedure has failed The maximum number of handset has been reached. the base station is too close to electrical appliances , reinforced concrete walls or metal door frames Troubleshooting Activate it (page 5). When the handset is placed on the charging unit, no beep is heard. [. . . ]