User manual PHILIPS TV 13 INCH HC9913C

[. . . ] HEALTH CARE (HC) MAIN ON-SCREEN MENU CONTROLS nstaller: This product is not provided with a pendant control; however, it is expected that this institution (or hospital) will provide one for attachment to the appropriate receptacle on the product. As part of the installation, examine the pendant control to determine whether a marking similar to the one below appears on it: "CAUTION - Risk of fire if used in oxygen-enriched atmosphere - return to hook or holder after use. " If the above notice is not provided on the pendant control, remove the label provided with these instructions and attach it to the pendant control. " A separate adhesive-backed label stating "CAUTION" "Risk of fire if pendant control is used in oxygen-enriched atmosphere. Keep pendant control away from oxygen equipment, " can be affixed by the installer to the pendant control if necessary. Note: Depending on the model and its features, some or all of the displays and features described below will be available. [. . . ] (You also may use the Number 3 buttons to enter the number of hours. For example, press 0, then 6, for six hours. Enter a zero before single-digit numbers. ) Or, press the button to select OFF (or press 0, 0). AUDIO/VIDEO MUTE - Highlight AUDIO/VIDEO MUTE, then press the or buttons to select OFF, BLACK, or BLUE. If BLACK or BLUE is selected, the screen will be solid black or blue when the TV is on a channel that is not receiving a signal. The sound will be muted on that channel. The normal background static will appear when the TV is on a channel that is not receiving a signal. WELCOME MESSAGE - Highlight WELCOME MESSAGE, then press the button to display the Welcome Message Sub-Menu. Within this Sub-Menu the WELCOME MESSAGE can be turned ON or OFF. Two lines (LINE 1 and LINE 2) on information can be set to be displayed on the screen when the TV is powered ON. Use the cursor v w buttons to scroll characters for the message lines. Clear will eliminate any message written. CHANNEL GUIDE - Highlight CHANNEL GUIDE, then press the or button to select OFF, ON, or POWER ON. If you select POWER ON or ON, the Channel Guide (a list of channels that are labeled) will appear when you turn on the TV. The Channel Guide will appear also when you press the CH GDE (Channel Guide) button. If you select ON, the Channel Guide will appear only when you press the CH GDE button. (Also, if you select POWER ON or ON, make sure CHANNEL DISPLAY is set to ALL. ) If you select OFF, the Channel Guide will not appear when you press the CH GDE button. Remember, only the programmed channels that are labeled (within the CHANNEL INSTALLATION MENU) will appear in the Channel Guide. REMINDER - Highlight REMINDER, then press the button to select ON. The current channel number (and Label, if assigned) will appear onscreen at all times. (Make sure CHANNEL DISPLAY is set to ALL and Closed Captioning is set to OFF. ) Or, press the button to select OFF. The channel number will appear briefly when the channel is selected, then disappear. [. . . ] AUDIO BLANK - When highlighted, press the or buttons to turn the AUDIO BLANK control ON or OFF. When ON, NO SOUND will be heard when the channel is tuned. NR: Not Rated - This is programming without rating encoding. This could be such programming as commercials, etc. V CHIP SETUP Sub-Menu MASTER DISABLE - When highlighted, press the or buttons to turn the MASTER DISABLE control ON or OFF. [. . . ]