User manual PHILIPS TV-VCR 13 IN 4 HD VCR CCA134AT99

[. . . ] Color TV with built-in VCR CCA134AT Owner's Manual Important!Return your Warranty Registration Card within 10 days. See why inside. TM Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. [. . . ] This means that the timer recording you just programmed and another timer recording overlap, and thus the current timer recording will not be carried out. · To stop a started timer recording, press the STOP/EJECT button on the TV/VCR. Please see page 64 for more Helpful Hints. 11 Press the POWER button to turn off the TV/VCR power. The RECORD light will flash slowly if a tape is in the TV/VCR. If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording starts. Timer Recording (cont'd) 37 Checking or Clearing Timer Recordings 1 2 3 4 5 6 2-4 POWER EJECT SLEEP/WAKE UP SPEED MEMORY REC/OTR PAUSE/STILL With the TV/VCR on, press the COMBI button, then press the MENU button. Press the PLAY/v button or the STOP/w button to select VCR PROGRAM, then press the F. FWD/B button. PLAY REW STOP F. FWD Press the PLAY/v button or the STOP/w button to select PROGRAM REVIEW, then press the F. FWD/B button. The timer recording information for the program in the lowest numbered position will appear on the screen. If no timer recordings are programmed, nothing will happen when you select PROGRAM REVIEW and press the F. FWD/B button. 1 MENU STATUS/EXIT CLEAR 1 4 7 A. CH CABLE/DBS 2 5 8 0 COMBI 3 CH. 5 6 9 VOL. VAR. SLOW VCR PLUS+ /ENTER MUTE TRACKING F. ADV SLOW Press the F. FWD/B button to display information about the next programmed timer recording. (If you do not press a button within 10 seconds, information about the next programmed timer recording will appear. ) This will continue until all positions have been displayed. You can exit the Program Review at any time by pressing the STATUS/EXIT button. SMART PICTURE SKIP INDEX SEARCH SEARCH To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed. Repeat steps 1 - 4 to make sure you have cleared the correct position. 38 Setting Up the VCR Plus+ Programming System 1 First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR Plus+ programming system to work properly. Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to area, you must program the TV/VCR with your local channel information. To fill in the boxes, you will need 1) a cable channel line-up list, if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper. NOTE: If you are using a Cable Box/DBS, the Cable/TV channel must be 03 or 04 (the Cable Box/DBS output channel) for every VCR Plus+ channel. TV Channels Station Call Letters VCR PLUS+ CH. Station Call Letters TV Channels VCR PLUS+ CH. CABLE/TV CH. Setting Up the VCR Plus+ Programming System (cont'd) 39 2 3 4 5 Now, compare the channel numbers you have written in the VCR PLUS+ CH. You'll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. Where the channel numbers DO NOT match, you must tell the TV/VCR the VCR Plus+ and Cable/TV channel numbers according to the following steps. q Make each entry within 60 seconds of the previous entry. 2 Examine the lists on page 38. 4-6 POWER EJECT SLEEP/WAKE UP SPEED MEMORY REC/OTR PAUSE/STILL PLAY REW STOP F. FWD Press the COMBI button, then press the MENU button. Press the PLAY/v button or the STOP/w button to select VCR SETUP, then press the F. FWD/B button. 3 MENU STATUS/EXIT CLEAR 1 4 7 A. CH CABLE/DBS 2 5 8 0 COMBI 3 CH. 6 9 7 6 VOL. Press the PLAY/v button or the STOP/w button to select VCR PLUS+ REF. MAP, then press the F. FWD/B button. VCR PLUS+ CROSS REF. MAP VCR PLUS+ CABLE/TV 124 ­­­ 125 ­­­ 01 ­ ­ ­ ­ B ­ ­ ­ 02 ­­­ 03 ­­­ TO SELECT CH PRESS vw THEN ENTER CH NO. [. . . ] Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner's manual and keep both nearby. Also keep the original box and packing material in case you need to return your product. Please check your owner's manual before requesting service. [. . . ]