User manual PHILIPS TV-VCR 19 IN 2 HD CCB190AT99

[. . . ] Color TV with built-in VCR CCB130AT CCB132AT CCB190AT CCB192AT Owner's Manual Important!Return your Warranty Registration Card within 10 days. See why inside. Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. [. . . ] If not, CLOCK MUST BE SET appears, followed by the SET CLOCK menu. (Make sure the tape's record tab is intact and the tape is long enough to record the program. ) Complete each step within 60 seconds of completing the previous step. If you don't, you may start again at step 1. 2-3 POWER SLEEP/WAKE UP PLAY REW STOP F. FWD 1 2 1 MENU STATUS/EXIT CLEAR 1 4 7 2 5 8 0 3 6 9 ALT. CH PAUSE/STILL CH. Press the MENU button. VOL. SPEED MEMORY > PRIM. SETUP PRESS B REC/OTR TRACKING MUTE VCR PROGRAM VCR SETUP CAPTION REMINDER BRIGHTNESS Press the PLAY/v button or the STOP/w button to select VCR PROGRAM, then press the F. FWD/B button. VCR PROGRAM > ONCE DAILY(MON-FRI) WEEKLY PROGRAM REVIEW SELECT KL CHOOSE B TO END PRESS EXIT Press the PLAY/v button or the STOP/w button to select a ONCE, DAILY, OR WEEKLY recording. q ONCE: The TV/VCR will record a TV program on any day you choose, up to 12 months away. q DAILY: The TV/VCR will record every day from Monday to Friday ­ starting at the same time and recording the same channel for the same length of time. q WEEKLY: The TV/VCR will record the same channel on the same day, at the same time, and for the same length of time every week. Daily Recording (example) DAILY PROGRAM (MON-FRI) PROGRAM -1 2 3 4 5 6 7 8- 3 Helpful Hints · With ShowGuard, you don't have to worry about losing your timer recordings. If the power fails, programmed timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using the AUTO CLOCK feature. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13. ) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure. · You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 36. SELECT PROGRAM NUMBER TO END PRESS EXIT Timer Recording (cont'd) 33 4 Use the Number buttons (1-8) to select a position in which to store the timer recording. Flashing numbers indicate an open position (one in which a timer recording has not been stored yet). NOTE: If you select a number that already has been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen for a few seconds. Then information about the program in that position will appear on the screen. If this happens, press the STATUS/EXIT button. Then use the Number buttons to select another position. 4-7 POWER SLEEP/WAKE UP 5 PLAY REW STOP F. FWD MENU Use the Number buttons to enter the channel of the TV program you want to record. q If you are recording from line input, press 0, 0. q If you are recording using a Cable Box, enter the Cable Box output channel (03 or 04). [. . . ] Number buttons won't work for channels above 69. · Enter channel numbers as a two-digit number. If you want to select channels 100 and above, enter channel numbers as a three-digit number. · If you are using an antenna, only channels 2-69 will be available. [. . . ]