User manual PHILIPS TV-VCR 25 IN 2 HD CCZ252AT99

[. . . ] CCZ252comb. QX33 4/6/99 8:50 PM Page 1 Color TV with built-in VCR CCZ252AT Owner's Manual Important!Return your Warranty Registration Card within 10 days. See why inside. CCZ252comb. QX33 4/6/99 8:50 PM Page 2 Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. [. . . ] · You cannot record if RECORD DEFEAT is set to ON. · You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape. · If the end of the tape is reached during an OTR, recording will stop. The TV/VCR will eject the tape and shut itself off. The REC(ord) light may flash. 4 To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/w button on the remote control. CCZ252comb. QX33 4/6/99 8:50 PM Page 31 Rerecording (Tape Duplication) 31 AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) AUDIO VIDEO POWER STOP VIDEO AUDIO OUT IN REC EJECT Audio Cable (white) from AUDIO OUT to AUDIO Video Cable (yellow) from VIDEO OUT to VIDEO AUDIO and VIDEO Jacks on TV/VCR 1 2 3 4 5 6 7 Make the connections shown above, using audio and video cables. (Make sure the source unit is connected to a power source. ) The source unit (VCR or camcorder) will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the unit. The TV/VCR will record your tape. Make sure the tape's record tab is intact. The TV/VCR power will turn on automatically. Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that A/V IN appears on-screen. Helpful Hints · To exit line input mode (A/V IN), press the Number buttons or the CHANNEL v/w buttons to select a channel other than 00. · Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. · Different brands of equipment may operate differently. · Make sure all connections are secure. Otherwise, you may not record both picture and sound. · Audio and video cables are not included. Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed (SP, LP, or SLP) appears on-screen. Press the PLAY button on the source unit and the REC(ord)/OTR button on your TV/VCR at the same time. Copying will begin. To stop copying, press the STOP/EJECT button on the TV/VCR, then stop the tape on the source unit (VCR or camcorder). CCZ252comb. QX33 4/6/99 8:50 PM Page 32 32 Timer Recording Follow the steps below to program the TV/VCR to record TV programs while you're away from home. The TV/VCR will turn itself on, record, and turn itself off automatically. Before you begin, make sure: q The clock is set. (Make sure the tape's record tab is intact and the tape is long enough to record the program. ) Complete each step within 60 seconds of completing the previous step. [. . . ] In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner's manual and keep both nearby. Also keep the original box and packing material in case you need to return your product. [. . . ]