User manual PHILIPS TV-VCR 25 IN 4 HD CCX253AT99

[. . . ] And take advantage of these important benefits. Warranty Verification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you'll receive all the information and special offers which you qualify for as the owner of your model. R A TIO NN E ED ED WIT Know these H ur ry ! REGIST safetysymbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. S H Congratulations on your purchase, and welcome to the "family!" Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You've selected one of the best-built, best-backed products available today. And we'll do everything in our power to keep you happy with your purchase for many years to come. [. . . ] If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13. ) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure. · You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 36. SELECT PROGRAM NUMBER TO END PRESS EXIT Timer Recording (cont'd) 33 4 Use the Number buttons (1-8) to select a position in which to store the timer recording. Flashing numbers indicate an open position (one in which a timer recording has not been stored yet). NOTE: If you select a number that already has been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on the screen for a few seconds. Then information about the program in that position will appear on the screen. If this happens, press the STATUS/EXIT button. Then use the Number buttons to select another position. 4-7 POWER SLEEP/WAKE UP 5 PLAY REW STOP F. FWD MENU Use the Number buttons to enter the channel of the TV program you want to record. q If you are recording from line input, press 0, 0. q If you are recording using a Cable Box, enter the Cable Box output channel (03 or 04). If you forget to turn off the TV/VCR, PLEASE TURN OFF FOR TIMER RECORDING appears on the TV/VCR screen two minutes before a timer recording is scheduled to begin. Timer Recording (cont'd) 35 Checking or Clearing Timer Recordings Press the PLAY/v button or the STOP/w button to select VCR PROGRAM, then press the F. FWD/B button. Press the PLAY/v button or the STOP/w button to select PROGRAM REVIEW, then press the F. FWD/B button. The timer recording information for the program in the lowest numbered position will appear on the screen. If no timer recordings are programmed, nothing will happen when you select PROGRAM REVIEW and press the F. FWD/B button. 1 2 3 4 5 6 2-4 POWER SLEEP/WAKE UP With the TV/VCR on, press the MENU button. PLAY REW STOP F. FWD 1 MENU STATUS/EXIT CLEAR 1 4 7 SLOW SPEED 2 5 8 0 MEMORY 3 6 9 SURF PAUSE/STILL 5 CH. VOL. REC/OTR TRACKING MUTE Press the F. FWD/B button to display information about the next programmed timer recording. (If you do not press a button within 10 seconds, information about the next programmed timer recording will appear. ) This will continue until all positions have been displayed. You can exit the Program Review at any time by pressing the STATUS/EXIT button. To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed. Helpful Hint · With ShowGuard, you don't have to worry about losing your timer recordings. If the power fails, programmed timer recordings will be restored when the clock is reset. (The clock will reset itself automatically if you are using the AUTO CLOCK feature. If you are not using the AUTO CLOCK feature, reset the clock manually. Details are on pages 12-13. ) The timer recording will not occur only if the timer recording was scheduled to take place during the power failure. Repeat steps 1-4 to make sure you have cleared the correct position. 36 Defeat Recording Follow the steps below to prevent accidental recording. 1 2 2-3 POWER SLEEP/WAKE UP Press the MENU button. > PRIM. [. . . ] This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted. ) · damage caused by the use of non-VHS tapes or tapes that have not been tested and labeled for use in two, four, six, and eight hour VHS recorders. · a product that is used for commercial or institutional purposes. Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics. In countries where Philips Consumer Electronics does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). [. . . ]