User manual PHILIPS TV-VCR 9 IN 2 HD CCA092AT99

[. . . ] Color TV with built-in VCR CCA092AT Owner's Manual Important!Return your Warranty Registration Card within 10 days. See why inside. Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS MAGNAVOX purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS MAGNAVOX product. So complete and return the Warranty Registration Card enclosed with your purchase at once. [. . . ] 3 hrs. 30 One-Touch Recording The One-Touch Recording (OTR) function allows you to program an immediate timed recording from 30 minutes to eight hours long without setting the timer. Before you begin, make sure: q Channels are set up. The record tab must be intact. 4 Press the STOP/EJECT button on the TV/VCR to stop the OTR. POWER SLEEP 1 3 Use the CH(annel) m/n button or the Number buttons to select the channel you want to record. PLAY Press the SPEED button until the desired recording speed (SP or SLP) appears on the screen. Details are on page 29. 2 REW STOP F. FWD MENU STATUS/EXIT CLEAR 1 4 7 2 5 8 0 3 6 9 ALT. CH PAUSE/STILL CH. 1 VOL. Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. The REC(ord) light will appear. OTR CH12 LENGTH 0:30 2 3 SPEED MEMORY REC/OTR TRACKING MUTE LENGTH : PRESS OTR CANCEL : PRESS CLEAR 4 To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/w button on the remote control. Helpful Hints · To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button. · To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on the screen. · To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button. · You cannot record if DEFEAT RECORDING is set to ON. · You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape. Rerecording (Tape Duplication) 31 AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) VIDEO AUDIO OUT IN AUDIO VIDEO REC POWER STOP EJECT Audio Cable (white) from AUDIO OUT to AUDIO Video Cable (yellow) from VIDEO OUT to VIDEO AUDIO and VIDEO Jacks on TV/VCR 1 2 3 4 5 6 7 Make the connections shown above, using audio and video cables. (Make sure the source unit (VCR or camcorder) is connected to a power source. ) The source unit will play your tape. Insert a prerecorded tape in the source unit. If playback begins, press the STOP button on the unit. The TV/VCR will record your tape. Make sure the tape's record tab is intact. The TV/VCR power will turn on automatically. Point the TV/VCR remote control at the TV/VCR. Press Number buttons 0, 0 so that A/V IN appears on the screen. Point the TV/VCR remote control at the TV/VCR. Press the SPEED button until the desired tape speed (SP or SLP) appears on the screen. Helpful Hints · Unauthorized recording of copyrighted television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. · Different brands of equipment may operate differently. · Make sure all connections are secure. Otherwise, you may not record both picture and sound. · Audio and video cables are not included. Press the PLAY button on the source unit and the REC(ord)/OTR button on your TV/VCR at the same time. [. . . ] Please keep your sales receipt or other document showing proof of purchase. Attach it to this owner's manual and keep both nearby. Also keep the original box and packing material in case you need to return your product. Please check your owner's manual before requesting service. [. . . ]