User manual PHILIPS TV-VCR 9 IN 2 HD CCX092AT99

[. . . ] And take advantage of these important benefits. Warranty Verification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS MAGNAVOX warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you'll receive all the information and special offers which you qualify for as the owner of your model. S REG I ST RATION N Know these y!urr H IT safetysymbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. EE DED AY W Dear PHILIPS MAGNAVOX product owner: Thank you for your confidence in PHILIPS MAGNAVOX. You've selected one of the best-built, best-backed products available today. [. . . ] Before you begin, make sure: q Channels are set up. The record tab must be intact. 4 Press the STOP/EJECT button on the TV/VCR to stop the OTR. 1 Use the CHANNEL o/p buttons or the Number buttons to select the channel you want to record. POWER MENU STATUS/EXIT CLEAR Press the SPEED button until the desired recording speed (SP, LP, or SLP) appears on-screen. Details are on page 29. 2 1 4 7 2 5 8 0 3 6 9 +100 MEMORY CHANNEL ALT. CH SLEEP Press the REC(ord)/OTR button repeatedly until the desired recording length appears in the upper right corner of the screen. The RECORD light will appear. OTR CH12 LENGTH 0:30 3 VOLUME MUTE SPEED REW/SEARCH PLAY/ FF/SEARCH 3 REC/OTR STOP/ PAUSE/STILL 1 2 LENGTH : PRESS OTR CANCEL : PRESS CLEAR 4 Helpful Hints · To check the time remaining for an OTR after the OTR has been set, press the STATUS/EXIT button. · To change the recording length while an OTR is in progress, press the REC(ord)/OTR button until the desired recording length appears on-screen. · To cancel an OTR but continue recording, press the REC(ord)/OTR button, then press the CLEAR button. · You cannot record if DEFEAT RECORDING is set to ON. · You can change the tape speed with the SPEED button while a recording is in progress, but some distortion may appear on the tape. To stop an OTR before recording is finished, press the STOP/EJECT button on the TV/VCR. Or, press the REC(ord)/OTR button, then press the CLEAR button, then press the STOP/w button on the remote control. CCZ190comb. QX33 4/5/99 9:51 PM Page 31 Rerecording (Tape Duplication) 31 AUDIO and VIDEO OUT Jacks on source unit (VCR or Camcorder) AUDIO VIDEO STOP/EJECT REW VIDEO AUDIO OUT IN EARPHONE Audio Cable (white) from AUDIO OUT to AUDIO Video Cable (yellow) from VIDEO OUT to VIDEO AUDIO and VIDEO Jacks on TV/VCR 1 2 3 4 5 6 7 Make the connections shown above, using audio and video cables. (Make sure the source unit is connected to a power source. ) The source unit (VCR or camcorder) will play your tape. Insert a prerecorded tape in the source unit. · You cannot set a timer recording if DEFEAT RECORDING is set to ON. Details are on page 36. SELECT PROGRAM NUMBER TO END PRESS EXIT CCZ190comb. QX33 4/5/99 9:51 PM Page 33 Timer Recording (cont'd) 33 4 Use the Number buttons (1 - 8) to select a position in which to store the timer recording. Flashing numbers indicate an open position (one in which a timer recording has not yet been stored). NOTE: If you select a number that has already been used to store a timer recording, PREVIOUSLY SET PROGRAM will appear on-screen for a few seconds. Then information about the program in that position will appear on-screen. If this happens, press the STATUS/EXIT button. Then use the Number buttons to select another position. 4-7 POWER MENU STATUS/EXIT CLEAR 5 q q q 1 4 7 2 5 8 0 3 6 9 +100 MEMORY Enter the channel of the TV program you want to record (you must enter a 0 before all single-digit channels). If you are recording from line input, press 0, 0. If you are recording using a Cable Box, enter the Cable Box output channel (03 or 04). Be sure to select the channel of the TV program at the Cable Box and leave the Cable Box on for the timer recording. PROGRAM 1 CHANNEL ­ ­ CHANNEL ALT. CH SLEEP VOLUME MUTE SPEED REW/SEARCH PLAY/ FF/SEARCH REC/OTR STOP/ PAUSE/STILL ONE TIME PROGRAM TO CORRECT PRESS CLEAR TO END PRESS EXIT 6 Press two Number buttons for the hour(s) you want the recording to begin. Press two Number buttons for the minute(s) you want the recording to begin. [. . . ] This includes, but is not limited to, prerecorded material, whether copyrighted or not copyrighted. ) · damage caused by the use of non-VHS tapes or tapes that have not been tested and labeled for use in two, four, six, and eight hour VHS recorders. · a product that is used for commercial or institutional purposes. Warranty service is available in all countries where the product is officially distributed by Philips Consumer Electronics Company. In countries where Philips Consumer Electronics Company does not distribute the product, the local Philips service organization will attempt to provide service (although there may be a delay if the appropriate spare parts and technical manual(s) are not readily available). [. . . ]