User manual PHILIPS UNIVERSAL REMOTE CONTROL SRU9600

[. . . ] Replacing Batteries When the batteries are almost empty, the Battery Low icon will start blinking, indicating the critical battery level. Note If the Battery Low icon is blinking, you can still operate the remote control, however you will no longer be able to enter the Setup menu. Please replace the batteries with new LR06 or AA type alkaline batteries and follow the local regulations for disposal of the empty batteries. You can select the different devices you have installed on your remote control by turning the rotary wheel clockwise or counterclockwise. [. . . ] Confirm that you have a working original remote control available to learn from. Select the hard key, touch screen key or extra function you want to fix. Extra functions can be selected by pressing the Jog Mode key, selecting the function with the rotary wheel and pressing OK. follow the instructions on the remote control. Note Fixing a key overwrites the key's data that was stored in your SRU9600. You can add extra functions to your SRU9600. Select the label you want to use for the extra function. Learn the function from your original remote. An activity consists of several key presses that will be sent out by your remote control with just one press. By default, the SRU9600 inserts a delay of 300ms between every key press to make sure your devices are responding correctly to the IR signals. If one of your devices needs a longer delay before receiving the next IR signal, you can insert a delay of 3 seconds. If an activity needs no delay between the different key presses, e. Turn up the volume, you can add the option `no delay'. select the option Add an activity in the Setup menu and press . Select the label you want to use for the activity. 1 Turn the rotary wheel to select a device from the list, press OK and add a key press to the activity. the activity will be added to your remote control. You can select the activity by turning the rotary wheel. You can delete an activity from your remote control. The activity will be available again in the list of activities you can add. You can change the language of your remote control to one of the following languages: Select the option Change language in the Setup menu and press Select the language you want to use on your remote control. When you use the remote control, the backlight, the touch screen and the upper part of the display are switched on. [. . . ] This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: - This device should not cause harmful interference - This device must accept any interference received, including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rule and ICES 003 in Canada. [. . . ]