User manual PHILIPS US2-P63S

[. . . ] 13 Setting any Mode to use its own Volume/Mute 13 TV/VCR/INPUT . Philips Universal Remotes let you replace a broken or lost remote or combine more than one remote into one. This remote control operates the common features of most but not all models and brands of IR Infrared Controlled Video Equipment. This remote may provide functions that are not available on your equipment. [. . . ] Press and release the MUTE button and the red indicator turns off. The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control. All other Modes will now punch-through to your chosen Mode for Volume/Mute control. All "Visual" and "Audio" programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control. Setting any Mode to use its own Volume/Mute Control This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/ Mute buttons will do nothing. Press and hold the CODE SEARCH button until the red indicator turns on, then release the button. Press and hold the MUTE button until the red indicator blinks off, then release the button. Press and release the VOLUME- (Down) button, the red indicator blinks then stays on. Press and release the MUTE button and the red indicator turns off. All "Visual" and "Audio" programmed Modes will now punch-through to the respective Modes you have chosen for Volume/Mute control. OK means same as SELECT - some manufacturers use OK label and others use SELECT label on their remotes. (You might have to reprogram your remote after installing new batteries. ) Remote may not be compatible with your product. Remote does not operate some features of your product. Remote may not be able to operate all features of your product or button names might be different than your product. Try to program the code again or try a different code. The manufacturer warrants that this product shall be free from defects in material, workmanship and assembly, under normal use, in accordance with the specifications and warnings, for as long as you own this product. This warranty extends only to the original purchaser of the product, and is nontransferable. Defective products, together with the dated proof of purchase, must be returned to the place of purchase for repair or replacement. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. CHAN may be called RECALL, or ENTER may be called DISPLAY. [. . . ] Press and hold the MUTE button until the red indicator blinks off, then release the button. Press and release the MUTE button and the red indicator turns off. The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control. All other Modes will now punch-through to your chosen Mode for Volume/Mute control. [. . . ]