User manual PHILIPS US2-PM725S

[. . . ] On the back of the remote, push down on the tab and lift the cover off. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. The TV Volume/Mute punch-through feature lets you control the Volume and Mute function of your TV in any mode programmed to be a VCR, DVD, Cable or SAT device, without needing to change to TV mode. This feature is also available if AUX mode is programmed to control a second VCR, Cable or SAT device. [. . . ] info/Select button brings up Satellite Display screen for current Channel and system information. Menu brings up the Satellite Menu screen - use with the Up, Down, Left & Right navigation buttons. oK button is used for on-screen Menu selection. Quit button is used to Exit or Clear on-screen Menu displays. Enter the 3 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. Note: If some buttons do not operate your equipment, try one of the other codes for your brand. Press the Channel Up button repeatedly (up to 300 times) until the device to be controlled changes channel. the red indicator blinks , then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. press and release the Mute button to install the code. The above assumes that you want to store VCR codes under the VCR button, Cable codes under CBL, etc. if you want to store a VCR code under CBL , etc. , first follow the procedure on page 10 and try ANY CBL code from the code tables, e. Press CBL in step 2, page 10, and then enter ANY VCR code. Code Search starts from the currently stored three digit number under that mode e. If the mode has 100 codes and the currently stored code is 050 then the Code Search starts from 051 continuing to 100 before looping back to 000 and finishing at 050. This simplifies the process if you find that several preprogrammed codes operate your device by allowing you to bypass codes already tried. Write your codes down here for easy reference later. Sleep Timer The Sleep feature enables the remote to turn off the TV after a period of 1 to 99 minutes. remote is to be in TV mode to set a Sleep Timer. [. . . ] Button (depending on which product you want to operate). Press other buttons to operate the features of your product. This warranty extends only to the original purchaser and is nontransferable. Should a defect occur under normal operating conditions from the date of purchase, PHILIPS will provide a comparable replacement free of charge within the warranty period, to the original purchaser. [. . . ]