User manual PHILIPS VCM9176

[. . . ] Retain this User Manual for future reference. â· Read the safety and operating instructions carefully before using the product. Do not place this product under direct sunlight or near heat sources, such as in a closed car under sunlight or near a stove. The outer casing of this product may become deformed and the sophisticated sensors inside may become damaged due to excessive heat. [. . . ] A year, and then press"OK" to confirm the setting to move to move to the Month field, press"OK" to or to select a month, highlight the Month field, press When inserting a memory card or a USB flash drive, you will be asked to copy all photos to the internal memory. If "Smart Copy" is set to "Resize" under "General Settings", photos will be resized to the screen resolution when copied to the internal memory to optimize the storage capacity. Please keep a copy of the original photos on your memory card or USB flash drive. To copy all photos contained in the inserted memory card (or USB flash drive), select the check proceed. To view photos without copying them to the PhotoFrame, select the cross mark and press"OK". The PhotoFrame will start playing back the photos automatically from the inserted memory card or USB flash drive. Do not remove the memory card/USB flash drive before the copy process is completed. â· If the files you wish to copy from the memory card/USB flash drive already exists in the internal memory of the PhotoFrame, the files will be overwritten when you select to proceed. Maximum capacity specification listed above are subject to change without prior notice You can connect the PhotoFrame to a computer using a mini USB cable (to be purchased separately) to easily manage the files in the internal memory of the PhotoFrame. Connect the other end of the USB cable to a USB port on the computer, making sure the connectors are fully inserted. Once connected, the PhotoFrame will enter PC transfer mode automatically. The "USB" and "Memory Card" file sources will only appear when a USB flash drive and a memory card have been inserted to the PhotoFrame. For details about the "TIMELINE" album, see "Managing photos by using the TIMELINE album" on page 22. Press or to select the source Press or to select the source of your photos, such as the Internal Memory album, and then press "OK". The screen shows all the photos that are available in the internal memory. If there are more than one page, you can press or to go to the previous or next page to browse photos (If not, skip this step. Press or to move to the photo you wish to select, and then press"OK" to confirm the selection. the selected photo will have a selection mark. Repeat Step 6 to select more photos as desired. In the PHOTO ALBUMS menu, press or to select an album from which you want to remove the photos, and then press"OK". Press or to move to the photo you wish to select, and then press"OK" to confirm the selection. the selected photo will have a selection mark. [. . . ] Customized Personalize Smart energy saver hours to your preference. Nighttime is defined as hours from : Daytime is defined as hours from : Using Smart Energy Saver p. To set a default clock skin to be displayed in Clock view, follow the steps below. The default clock skin will be displayed when ( or is pressed Switching between Clock view and Slideshow view you can press Slideshow view. [. . . ]