User manual PHILIPS VKR6878

[. . . ] To remove the plug, grip the plug body and pull it from the outlet. 12 Only use the appliance for its intended purpose as described in these in instructions. Never chop herbs, ice, nuts or sugar in the appliance. 13 Check the grinding chamber for the presence of foreign objects before use. [. . . ] If a too coarse grind is used for a particular brewing method, this will result in underextraction and weak, watery coffee. If the correct grind is used, adding more coffee simply makes the coffee stronger without making it bitter. Besides offering a number of grind settings, this coffee grinder also guarantees a consistent grind. This is important to ensure the extraction is always consistent across all of the ground coffee particles. 5 Using the coffee grinder B Warning: Make sure the appliance is unplugged. 1 Place the lid on the ground coffee container and slide the ground coffee container into the appliance. D Note: Make sure that the lid is placed on the ground coffee container correctly and the ground coffee container is placed in the appliance correctly. The grinder does not work if this is not the case. 2 Remove the lid of the bean hopper (Fig. €¯4) Do not fill the bean hopper beyond the MAX indication. 4 Place the lid on the bean hopper and press it down until it closes with a click (Fig. B Warning: Always unplug the appliance before you clean it. B Warning: Never immerse the appliance, the cord and the plug in water or any other liquid or rinse them with running water. B Warning: Do not use any corrosive detergents and abrasive pads or cloths to clean the appliance. D Note: Regular cleaning of the removable upper burr is necessary to ensure proper working. 1 Remove the ground coffee container from the appliance and empty it. D Note: To preserve the ground coffee’s aroma, empty the ground coffee container into a filter for direct use or into an airtight container for storage immediately after grinding. Clean the lid of the bean hopper, the ground coffee container and the lid of the ground coffee container in warm soapy water or in the top rack of a dishwasher. To remove the upper burr, set the grind selection knob to the fine grind setting (Fig. Grasp the top of the upper burr, turn clockwise (1) and pull upward vertically (2) to remove it from the bean hopper (Fig. 7 8 9 10 11 D Note: Do not clean the removable upper burr in or with water. Carefully clean the inside of the bean hopper with a damp cloth. [. . . ] The resettable thermal fuse of the motor was activated. To reset the thermal fuse, allow the appliance to cool down for approx. To avoid overheating, do not exceed the MAX indications of the bean hopper and the coffee bean container. €¢â€¢ Check if the upper burr is correctly positioned in the bean hopper (see chapter ‘Maintenance’ ). [. . . ]