User manual PHILIPS VR140

[. . . ] VR140/07 Thank you for buying a Philips video recorder. This video recorder is one of the most sophisticated and easy-to-use video recorders (VCR) on the market. Please take the time to read this operating manual before using your video recorder. It contains important information and notes regarding operation. [. . . ] This 5. allows the video recorder to save all available TV channels. This procedure may take several minutes. 6. When the TV channel search is complete, 6. 'COMPLETED' will briefly appear on the TV screen. PLAY B-K or STOP C-L , select the saved TV channel that you want to change. 7. Move the selected channel with PLAY B-K or 7. STOP C-L to the programme number you want to assign. 9. To assign other TV channels to a programme 9. 10. Confirm the assignment of the TV channel 10. 11. To exit the MOVE menu, press STATUS/EXIT . 11. 5. With 5. 7 EN Setting the clock If the display shows an incorrect time or ' --:-- ', the time and date must be reset manually. 3. Select 'INITIAL SET UP' with PLAY B-K or 3. STOP C-L Setting the RF out channel In some reception locations it is possible that a TV channel will be sent on the same or similar frequency as the video recorder. Result: As soon as the video recorder is switched on, the reception quality for this or several other TV channels will decrease. The following steps will show you how to change the pre-set 'transmission' (RF out channel) frequency on the video recorder. This electronic component in the video recorder allows the device to transmit audio and video signals via the aerial cable. These signals can be received on a TV set just like TV channels. This frequency or channel indicates the channel on which the audio or video signal is transmitted. and confirm with FWD 1- B FWD 1- B . 4. Select 'CLOCK' with 4. and confirm with PLAY B-K or STOP C-L . TIME --:-DATE --/--/-- END=EXIT 5. Check the time in 'TIME'. If required, please 5. change the time with 0. . 9 . 6. Check 'DAY', 'MONTH' and 'YEAR' in the 6. If required, select the pro1. gramme number for the video recorder. 2. Press MENU . 3. Select 'INITIAL SET UP' with PLAY B-K or 3. STOP C-L and confirm with FWD 1- B FWD 1- B . 4. Select 'RF OUT' with 4. and confirm with PLAY B-K or STOP C-L . SELECT K L CHOOSE B RF OUT CH 35 END=EXIT 5. Press 5. , STOP C-L or 0. . 9 to select a free (not allocated) channel between channel 22 and 69 in your area. 7. FWD 1- B PLAY B-K If you cannot get an interference-free picture and sound, switch the built-in modulator off. [. . . ] 2. Press and hold STOP/EJECT and PROGRAMME+ for 2 seconds or more at the same time. Cassette is jammed in the video recorder: * Don't use force. Remote control does not work: * Remote control not pointed toward the video recorder: point it at the video recorder. * There is a technical problem: Take out the batteries, wait for 10 seconds and place them back. [. . . ]