User manual PHILIPS VR6291

[. . . ] 9 Manual Channel Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Basic Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting Colour Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 18 G-CODE® Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Timer Recording Using the G-CODE System . . . . . . . . . . . . . . . . . . . . 21 Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Turbo Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Tape Duplication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Operating TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Before Requesting Service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 -33 01. 5. 11, 4:42 PM BASIC OPERATIONS (CONTINUED) Recording When using this VCR, an index mark is always marked at the beginning of every recording. This index marks make it easier for you to search for the beginning of the recordings. See "Index Search" on the next column. · The record tab on the cassette is not removed. You can watch the programme of the selected channel on the TV, without affecting recording on the VCR. Erase protection Cassettes have the record tab to ensure that recordings are not accidentally erased. To prevent accidental erasure: Break off the record tab with a screwdriver. To record again, cover the opening with adhesive tape. 1On TV 1 Turn on the TV. (GUIDE CH) Ch 2 Ch 7 Ch 9 Ch 10 Ch 28 -2020 Local TV Station's Name ABC2 ATN7 TCN9 TEN10 SBS28 G-CODE Local Channel No. (USER CH) (GUIDE CH) Ch 2 Ch 7 Ch 9 Ch 10 Ch 28 Ch 2 Ch 7 Ch 9 Ch 10 Ch 28 01. 5. 11, 4:42 PM GUIDE CHANNEL SET UP GUIDE CH USER CH 254 -255 -01 05 02 02 03 03 SELECT: OR 0-9 CONFIRM: OK END: TIMER By entering the G-CODE number for a particular TV programme, you can easily programme a timer recording. G-CODE PROG. 3 Press PLAY5 or STOP to select"G-CODE" then END: TIMER press OK/STATUS. The G-CODE entry menu appears on the TV screen. 1 Press Number buttons to enter the G-CODE number assigned to the TV programme you want to record. 2 Press OK/STATUS. · If "ERROR-RE-ENTER CODE" appears on the TV, you have entered an incorrect G-CODE number. If this happens, press CLEAR to erase the number, then enter the correct number. · If you have not yet set the user channel, the "GUIDE CHANNEL SET UP " screen will appear. Press PLAY5 or STOP buttons repeatedly or number buttons to enter the USER CH number which the broadcast for the G-CODE number is received on the VCR, then press OK/STATUS. Press ALT/SPEED. · Each time you press the button, the tape speed alternates between "SP", "LP", or "SLP". DAILY: 8 WEEKLY: 9 SP, LP : For PAL signal CONFIRM: OK END: TIMER SP, SLP : For NTSC signal · To change the stop time, press STOP +/­ (number 2 or 5 button). Press OK/STATUS or TIMER. "PROGRAM WAS COMPLETED" appears on the TV screen. After 5 seconds, the above message disappears, and the normal TV picture resumes. [. . . ] 123 CONFIRM: OK CORRECT: CLEAR END: TIMER 3Select Tape Speed ONE TIME PROGRAM PROGRAM 1 CHANNEL+/­ 12 START +/­ 08 : 00 PM STOP +/­ 10 : 00 PM REC SPEED LP DATE +/­ ­ ­/­ ­/­ ­ 4Confirm Programme 1 Connect the recording VCR (this VCR) and the playing VCR. 2 Connect the recording VCR (this VCR) to the TV. Playing VCR IN R AUDIO L VIDEO RF OUT VIDEO OUT ANT. IN AUDIO L RF OUT Dubbing from any VCR (or video camera) to another is simple. Explanations on this page uses this VCR as the recording VCR. Refer also to the manual supplied with the other VCR (for playback). [. . . ]