User manual PHILIPS VR630

[. . . ] Programming a recording (with 'ShowView') . Programming a recording (without 'SHOWVIEW') . Programming a recording with 'TURBO TIMER' . How to check or change a programmed recording (TIMER) . [. . . ] If required, select the programme This will, for example, appear in the display. number for the video recorder. b Press MENU on the remote control. The main menu will 0:00:02 c To stop, press the STOP h button. d To eject the cassette, press STOP/EJECT h/J on the video appear. c Select the line 'SPECIAL SETTINGS' with ;P q or rP = and confirm with OK . SPECIAL SETTINGS OSD CLOCK DISPLAY COUNTER SAT RECORDING REPEAT PLAY DIRECT RECORD è ON p OFF T. LEFT OFF OFF OFF recorder when the video recorder is in STOP mode. D Some functions switch off automatically after a while (for example, pause, still picture, picture search). This helps to protect the cassette and avoids wasting power. D For playback, the correct recording speed will automatically be selected. Please read the section 'Selecting the recording speed (SP or LP)' in the chapter 'MANUAL RECORDING'. ________________________________ EXITpMENU STOREpOK d Select the line 'COUNTER' with ;P q or rP = . e Select 'LINEAR' or 'T. LEFT' with Q or P and Playing NTSC cassettes With this set you can playback cassettes that have been recorded on another video recorder in the NTSC standard (for example, American cassettes). But this only works for PAL-television sets which are suitable for a picture frequency of 60 Hz. D When you play an NTSC cassette '60HZ' will appear on the display. D Some special features (for example, still picture) are not possible while you are playing an NTSC cassette. confirm with OK . D The counter 'LINEAR' will be set to '0:00:00' when you put a cassette in the machine. This is important if you, for instance, don't want to record to the end of the cassette. E Read the section 'Direct record' if you want to record a programme currently being shown. E Read the section 'Automatic recording from a satellite receiver', if you want a recording to be controlled automatically by a satellite receiver. you want to record. c Press RECORD n on the remote control. d Each time you press RECORD n you will add 30 minutes to the recording time. D To cancel this information, press CLEAR (CL) . Recording without automatic switch-off a Insert a cassette. b Use ;P q or rP = to select the programme number Protecting your recordings So that you don't accidentally delete an important recording, remove the special tab on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want to protect your recording, you can seal the gap again with sticky tape or slide the special tab to the right. you want to record, for example, 'P01'. This will appear on the display: BBC1 D When a TV channel transmits a channel name, it will show on the video recorder display. D Programme numbers 'E1' and 'E2' are for recording from other sources (through scart sockets AV1 EXT1 and AV2 EXT2 ). Programme number 'E3' is for recording from the audio and video front sockets. c To start recording, press RECORD n on the remote control Auto-assembling You can use the auto-assembling function to join individual recordings without any major picture disturbance between them. a While the cassette is playing, search for the correct position on the tape. b Stop the cassette by pressing STOP h . '9' will appear in the display. c Now start recording as usual by pressing RECORD n on or RECORD n on the video recorder. [. . . ] Your video recorder does not respond to any button being pressed: · · · · There is no power supply: check the power supply. A programmed recording is currently being made: if desired, cancel the programmed recording with STANDBY/ON m . Child lock is on: switch the child lock off. There is a technical problem: switch off the mains power supply for 30 seconds, then switch it on again. [. . . ]