User manual PHILIPS VR750

[. . . ] Selecting the recording speed (SP or LP) Automatic controlled recording from a satellite receiver (RECORD LINK) . Switching the status display off or on Blue Background on or off . Please take the time to read this operating manual before using your video recorder. it contains important information and notes regarding operation. [. . . ] SP/LP: will show the recorded speed of your cassette. 'REM 0:06': will show the remaining time left on the tape in hours and minutes. When you play back an NTSC cassette, the video recorder will show 'REM -:--'. how can I set the counter to '0:00:00'?You can set the counter to '0:00:00' with CLEAR . when you put a cassette in the video recorder , the counter will automatically reset to '0:00:00'. The counter does not move This occurs when there are no recordings on a portion of a tape. This is not a fault in your video recorder. The screen shows '-0:01:20' If you rewind a cassette from the tape position '0:00:00', the counter will show for instance, '-0:01:20' (the cassette was rewound to 1 minute and 20 seconds before '0:00:00'). '-:--' is displayed in the 'REM' counter This counter will automatically recognise the length of the tape. In addition, when you put in a cassette, the video recorder will first calculate the time played back. Therefore, '-:--' appears first and only after the tape has been running for a few seconds, the correct remaining time will be shown. Pause, still picture) switch themselves off automatically after a short time in order to protect the cassette and to save energy. Do I need to change the playback speed when playing back LP recordings?During playback, the correct speed will automatically be selected. For more information, please read the section 'Selecting the recording speed (SP or LP)' in the chapter 'Manual recording'. You can change the picture setting during playback. It reduces the noise, making the picture more enjoyable. 'SHARP': best for cartoons or animation movies. This setting will remain stored until you eject the tape. If you want to search in super high speed, 2. Still picture / slow motion During playback, press SLOW to play back 2. [. . . ] After 5 seconds, the OSD will disappear. You can switch off the information about the operating status so that the status display is not recorded when copying videocassettes. If you haven't used the video recorder for a few minutes in certain modes (e. You can cancel this function to use the video recorder as a television receiver. [. . . ]