User manual PHILIPS VR757/05L

[. . . ] The video recorder should not be turned on immediately after transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three hours after transporting the device. The video recorder needs this time in order to become acclimatised to its new environment (temperature, air humidity, etc. Please make use of the facilities available in your country for disposing of the packaging of the video recorder in a way that helps to protect the environment. [. . . ] When the TV channel search is complete, 6. After you have performed the automatic channel search you may not agree with the sequence in which the individual TV channels have been allocated to the programme positions (programme numbers) of the video recorder. You can use this function to individually sort the TV channels already saved. The clock resets automatically If you save a TV channel that transmits VPS/PDC or the Teletext on programme number 'P01', date and time will constantly be updated. You can change the language for the TV screen menu. However, the video recorder display will only display English text regardless of this setting. And confirm with and confirm with PLAY B-K or STOP C-L , select the saved TV channel that you want to change. If the display shows an incorrect time or '--:--', the time and date must be reset manually. If a TV channel that transmits VPS/PDC or the Teletext is stored under programme number 'P01', time/date will automatically be taken from the VPS/PDC or the Teletext information. Result: As soon as the video recorder is switched on, the reception quality for this or several other TV channels will decrease. The following steps will show you how to change the pre-set 'transmission' (RF out channel) frequency on the video recorder. To manually adjust the tracking during playback and slow motion playback, press PROGRAMME+ PROGRAMME- or P+ P­ . Tracking will return to Automatic Tracking Adjustment when you press STOP C-L , insert a tape, or press PLAY B-K . 'Fr' or 'FF' will appear on the display for 5 seconds, and then, the remaining tape time will appear. Every time a tape is recorded an index marking is written on the tape. These marked positions can be found again quickly and easily later. 'Fr' will appear on the display for 5 seconds, and then, the remaining tape time will appear. 'FF' will appear on the display for 5 seconds, and then, the remaining tape time will appear. As soon as the video recorder finds this 3. Use 'Manual recording' to make a spontaneous recording (for example, a programme currently being shown). If you want to start and stop a recording manually, read the section 'Recording without automatic switch-off'. Read the section 'DIRECT RECORD' if you want to record a programme currently being shown. [. . . ] SYSTEM on the remote control to select the TV (colour) system with the least disruptions during playback. Blue Background on or off If you want the TV screen to be solid blue when a weak signal is received, set BLUE BACKGROUND to 'ON'. The screen will be blue and the sound will be muted. Or, if you want to receive the weak signal, set BLUE BACKGROUND to 'OFF'. [. . . ]