User manual PHILIPS VR830

[. . . ] When the appliance is connected to the power supply there are some components that are constantly operational. To switch off the video recorder completely you must disconnect it from the power supply. PLAYBACK . Recording with/without automatic switch-off . Automatic recording from a satellite receiver (SAT RECORDING) . [. . . ] h Use a scart cable to connect the scart socket you e Select the line 'DIRECT RECORD' with the menu buttons P= or P; . f Select the function 'ON' with the menu buttons Q or P . If you select 'OFF', the function will be switched off. selected on the video recorder ( AV1 EXT1 or AV2 EXT2 ) to the corresponding scart socket on the satellite receiver. i Insert a cassette. g Confirm with the OK button. i Switch off with the STANDBY m button. j To end, press the STANDBY m button. The video recorder is now prepared for recording. The start and end of the recording is controlled via one of the scart sockets. D When this function is switched on, 'x' appears in the display. j On the TV set, select the programme number you want make the recording from. k Press the RECORD/OTR n button with the video recorder switched off. D Don't select another programme number on your TV set, until the 'search symbol' in the display of your video recorder disappears. D When 'NOTV' appears in the display, the programme number could not be found. The video recorder switches off automatically. 11 4. AUTOMATIC (PROGRAMMED) RECORDING d Enter the entire PlusCode number (up to 9 digits) printed The video recorder needs the following information for every programmed recording: * the date on which the recording is to be made * the programme number for the TV channel * the start and stop time of the recording * VPS/PDC on or off * the recording speed (SP/LP) The video recorder stores all the information mentioned above in a TIMER block. You can programme up to 6 TIMER blocks, one month in advance. in your TV guide next to the start time of a TV programme. If you made a mistake, clear with the CLEAR (CL) button. TIMER VIDEOPLUS PROGRAMMING 12345678 ________________________________ MO-FR/WEEKLY TO STORE PRESS SELECT PRESS OK 'VPS' (Video Programming System)/ 'PDC' (Programme Delivery Control) With 'VPS/PDC', the TV station controls the beginning and the length of the programmed recording. 'MO-FR': Recording to be made from Mondays to Fridays inclusive. 'MO': Weekly recordings on the same weekday. D Use the 'START'. SELECT button to switch 'VPS/PDC' on or off in D Use the SELECT button to select the recording speed 'SP' or 'LP' in 'END'. f Confirm with the OK button. D The data has been stored in a TIMER block. g To end, press the TIMER s button. h Please note that you inserted a cassette without erase protection. The programmed recording will only function when the video recorder is switched off with the STANDBY m button. D If one or more of the TIMER blocks are occupied, 'k' lights up in the display. D If the end of the cassette is reached during a recording, the video recorder automatically ejects the cassette. The set switches off after a few minutes. D If you forget to load a cassette, 'NO CASSETTE' appears on the TV screen and 'k' lights up in the display. D If you inserted a cassette with erase protection, the cassette will be ejected. D Programme numbers 'E1' and 'E2' are provided for external recordings (via scart socket AV1 EXT1 or AV2 EXT2 ). [. . . ] You can also call the customer service in your country. You will find the telephone numbers in the enclosed guarantee leaflet. The set does not respond to any button being pressed: · · · · No power supply. A programmed recording is currently being made. [. . . ]