User manual PHILIPS VR850

[. . . ] Operating instructions PHILIPS VR850/07 Congratulations !You now have one of the most sophisticated and easy-to-use video recorders (VCR) on the market. With this VCR you can record and play standard VHS cassettes. Connecting your video recorder to the TV set . [. . . ] D If VIDEO Plus+ does not recognize the TV channel, 'PLEASE ENTER PROGRAMME NUMBER' will appear on the TV screen. You can select the programme number with the P ; or P = button. D If 'PLUSCODE NUMBER WRONG' appears on the TV screen, this means you have entered an incorrect PlusCode number or the incorrect date. Correct your instructions or end with the TIMER s button. D If 'WEEKEND PROGRAMMING - NOT POSSIBLE' appears on the TV screen, this means you have entered an incorrect date. You can only use daily programming for recordings from Monday to Friday. D Under 'START', use the PDC on or off. SELECT Programming with VIDEO Plus+ All the information your video recorder needs is contained in the PlusCode programming number. button to switch VPS and a Switch on the TV set and select the programme number for the video recorder. b Press the TIMER s button on the remote control. c Select the line 'VIDEOPLUS PROGRAMMING' with the D Under 'END', use the SELECT button to select the recording speed SP or LP. g Confirm with the OK button. menu buttons OK button. P= or P; and confirm with the D The programming information has been stored in a TIMER block. h To end, press the TIMER s button. i Make sure that the cassette you have put in can be recorded on. j Switch off the video recorder with the mSTANDBY button. 12 D If any of the TIMER blocks are in use, 'k' will light up on the video recorder display. D If you reach the end of the cassette during a recording, the video recorder will automatically eject the cassette. D If you forget to load a cassette, 'NO CASSETTE' will appear on the TV screen and 'k' will flash on the video recorder display. D If you have put in a cassette which cannot be used for recording, the video recorder will eject it. D Programme numbers 'E1' and 'E2' are not for recordings from your TV. D Programme numbers 'AUX' and 'MIC' are for audio recordings, not recordings from your TV. D The programming information has been stored in a TIMER block. g To end, press the TIMER s button. h Make sure that the cassette you have put in can be recorded on. Switch off the video recorder with the mSTANDBY button. D If any of the TIMER blocks are in use, 'k' will light up on the video recorder display. D If you reach the end of the cassette during a recording, the video recorder will automatically eject the cassette. The TV set will then switch off after a few minutes. D If you forget to load a cassette, 'NO CASSETTE' will appear on the TV screen and 'k' will flash on the video recorder display. D If you have put in a cassette which cannot be used for recording, the video recorder will eject it. D Programme numbers 'E1' and 'E2' are not for recordings from your TV. [. . . ] slide down the cover TV m TV y Pp & The front of the set VIDEO Video input socket This is to connect the video sockets of a camera recorder or video recorder. EDIT input socket This is to connect a suitable camera recorder. Manual sound control This is to switch between automatic sound control and manual sound control. SYNCHRO EDIT MANUAL The back of the set STANDBY m Standby This switches off the set. If you press STANDBY m , it will automatically cancel any menu you have chosen and will stop TIMER recording. [. . . ]