User manual PHILIPS VSS7370

[. . . ] English Colour Observation System Table of contents Page Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Connection and operation facilities. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Camera Monitor Operation of the monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The monitor reproduces the image and sound of the camera input the Alarm/Action box (which triggered the alarm) is designated to. Silent function ON On occurrence of an alarm the monitor stays in `power save' mode. No image or sound is reproduced, the system mode indication LED is red blinking. The alarm output contact is activated, information is sent to the slave monitor and the history table is updated with this alarm event. Remark: The camera image and sound will always be sent to the VCR output and slave output. Select SILENT from the Main Menu; Press N until the text next to SILENT is highlighted. Press K or L to deactivate (OFF) or activate (ON) the silent function. · · 6 Auxiliary output selection (AUX. ) With this option you select which camera's output signal is sent to the aux. from the Main Menu; Press N until the present selected camera input number next to AUX. Press K or L to select the previous or next camera input number. · · Install menu (INSTALL MENU) · · r · · · Select INSTALL from the Main Menu; Press N until the symbol Y next to Install is highlighted. Press M when you want to return to the Main Menu. The install menu contains the following items: INSTALL MENU DISPLAY TIME DATE AUTO INSTALL LANGUAGE LEFT 13:12:46 96-09-19 ENGLISH CL 66610005_024g. AI g 8 The items of the install menu are discussed in the following sections. 1 4 Auto install (AUTO INSTALL) Select this option when you want to check the configuration of the system. Select AUTO INSTALL from the Install Menu; Press N until the symbol Y next to AUTO INSTALL is highlighted. Press K or L to start the installation procedure. The text SYSTEM CHECK appears on the monitor screen. After approximately 20 seconds the following texts can appear on the monitor screen: AUTO INSTALL COMPLETED r Display time and date (DISPLAY) With this option you can select if and where you want to display the time and date on the monitor screen (Lower left-hand corner, Lower right-hand corner or off). Select DISPLAY from the Install Menu; Press N until the text next to DISPLAY is highlighted. Press K or L to select between LEFT, RIGHT or OFF. · · · · r 2 Time adjustment (TIME) Use this option when you want to adjust the clock of the system monitor. Select TIME from the Install Menu; TIME · · : 2s s3:15:41 The system is installed correctly. After approximately 30 seconds or when a button is pressed the Install Menu returns. CONFIGURATION CHANGED Press K or L to adjust the hours. Press N until the minutes are highlighted. [. . . ] The monitor is fitted with a connector which allows you to connect a following slave monitor. Time-lapse VCR This VCR records the images from the observation system. The time lapse facility enables the VCR to extend the recording time of a tape. For example the recording time of an E-180 tape - depending on the VCR type - is extended to one day or even one month. [. . . ]