User manual PHILIPS VSS9451/00T

[. . . ] The exclamation mark within a triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Note: We advise you to use the following types of mains power adaptors in combination with the camera: UK Philips VCM1162/01R EUR Philips VCM1162/00R 2 English Interface Box Table of contents Page Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Mounting the box System cable External power supply Location of switches and connectors Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Input selector switch Internal switches Power supply (Internal/External) Last in line switch Volume preset Cable length compensation selector Possible configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Third party camera, video and audio signals System camera with external audio VCR input and output of separate camera Third party monitor Cash Register Interface System camera at long distance English g Read these instructions, before putting your system in operation. g 3 Introduction Thank you for buying this accessory for your observation system. FA FA R < > NE 6 R < > NE 6 8 7 AR AR 4 4 4 5 4 4 4 4 1 2 Colour Observation Monitor 3 Colour Observation Monitor _ + auto next view Colour Observation system talk action menu CL 66610005_005a. AI 1 2 3 4 5 6 7 8 System monitor Video recorder (VCR) Slave monitor Accessory boxes (0-2 per cable) Interface box System cameras Non system cameras (CVBS) Mains power adapter The following items are included in this kit: 1 Interface box 1 System cable (5m/15ft) 1 User manual g 4 The interface box can be used to add, or extract, normal standard audio and/or video signals to, or from, your Colour Observation system. This means that the interface box can be used to connect a third party camera to your Colour Observation system. a Cash Register Interface to the Colour Observation system, or to connect a system camera to a third party system. [. . . ] Selection between the twisted pair system cable input and CVBS/Audio input is done by means of an outside switch. Installation Remark: When the system configuration is altered, the system monitor needs to check and memorise the configuration of the cameras and accessories connected to its inputs. This is done automatically when the power is switched on. Use the power switch to switch off; only operating the power save key is not sufficient. If switching off is impracticable, use the auto install option of the system monitor's install menu. g 5 Mounting the box 1 Loosen the screw holding the cover and remove the cover. CL 76610003_001. AI 2 Remove the circuit board 1. CL 66610005_502. AI 3 Fasten the bottom plate of the box with two screws. CL 66610005_504. AI 4 5 6 7 Fit the circuit board. IMPORTANT: Adjust the settings of the circuit board switches to configure the box according to your system. Fit the cover and secure the screw holding it. See section 'possible configurations' for the correct connections and the setting of the 'input selector switch' and the internal 'slide switches'. g 6 System cable For the interconnections between the monitor, accessories and camera, a system cable is supplied. For an optimum picture and sound quality, you should always use 4-wire dual twisted-pair cable when extending the connection (max. The cable and plugs are available in the hobby and professional trade. Fix the connectors to the cable corresponding to the figure below. 45 4-5 2-3 2 34 5 2 34 5 2 3 2 3 45 4-5 2-3 CL 66610005_006. AI Caution: The plugs used for the observation system have the same dimensions as standard telephone plugs. The figure below shows a block diagram with the audio/video signal paths. INPUTS OUTPUTS FA R < > NE VIDEO -IN (BNC) AUDIO-IN (CINCH) The following configurations are possible: Remark: In some configurations, the camera cannot be synchronised to the system monitor (not locked). When a quad monitor is used in quad mode, it will result in unusable pictures. 1 Third party camera, video and audio signals (not locked) A/A box or int. box Third party camera I/F box Colour Observation system talk action menu _ + auto next view camera AR Colour Observation system talk action menu _ + auto next view AUX. OUTPUT VIDEO-OUT (BNC) AUDIO-OUT (CINCH) CL 76610003_003. AI 24V aux. INT. NO CL 76610003_007. AI g 11 2 System camera with external audio (locked) Remark: Audio from the aux. input is always added to the camera sound. FA R < > NE A/A box Microphone camera AR A/A box or int. box I/F box Colour Observation system talk action menu _ + auto next view 24V aux. INT. NO CL 76610003_009. AI 3 FA R VCR input and output of separate camera (locked) < > NE A/A box camera AR A/A box or int. box I/F box Colour Observation system talk action menu _ + auto next view 24V aux. INT. [. . . ] NO VCR only sound of camera CL 76610003_005. AI g 12 4 · · Third party monitor (Break-out box) with system monitor attached, locked without system monitor attached, not locked A/A box or int. box AR FA R < > NE A/A box or int. box I/F box Colour Observation system talk action menu _ + auto next view 24V camera aux. INT. NO Third party CL 76610003_006. AI 5 FA R Cash Register Interface (locked, with external audio loop) < > NE A/A box camera AR A/A box or int. [. . . ]