User manual PHILIPS WACS4500

[. . . ] Wireless Music Center + Station WACS4500 User manual Manuel d'utilisation Manual del usuario Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13Amp plug. To change a fuse in this type of plug, proceed as follows: Remove fuse cover and fuse. Fix the new fuse which should be a BS1362 5Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug should be fitted in its place. If the mains plug contains a fuse, it should have a value of 5 Amp. [. . . ] HD ­ MUSIC BROADCAST will also stop when: ­ the Center is put to standby mode or power-saving mode; ­ the selected album or playlist has reached the end. You can edit track title, Album name etc. on Center with the 1-way remote control. 6. 10 Viewing system information 1 Select Information on the Center or Station a. Press the navigation controls 3 or 4 and 2 to enter Information menu The display shows: System, WiFi and Ethernet 1 2 3 4 Press SOURCE to select HD Press 3 or 4 and 2 to select the track to be renamed Press MENU "Edit" is shown on the LCD display Press 3 or 4 and 2 to select Edit Now you can start editing track information by following the sequence below: Edit track title Edit Artist name Edit Album name Edit Genre name Press the following keys on remote control to edit track information: Alpha- Insert text into the current position. numeric keys 1 5 2 Press the navigation controls 3 or 4 and 2 to select System The following information will be shown on the display: the name of the Center or Station, firmware version and free hard disk space (for the Center only) Move highlight to previous editing position. If it is already at leftmost position, press this button to move to previous screen. Move highlight to next editing position. Press it briefly to delete the current highlight text; press and hold it to delete all text Confirm the text and enter next screen 2 fl OK 6 After completed editing Genre name, the LCD will shows "Updating. . . " first and then "Update success" (if succeed) or "System busy, please edit later" (if failed). Helpful hints: ­ If no any key is pressed for 60 seconds, the edit screen will disappear without saving anything. ­ The maximum length of editing string is 21characters. ­ If the recorded tracks is not recognized (see User Manual section 6. 5. 1 Recording from CD), the display will show "Album name: xxx, to rename, refer to manual. " Follow steps above to edit the track information. ­ You can also edit album/playlists name when browsing album/playlists list: for illustration only 33 English 6. 11 Edit Track Information 6. Press 3 or 4 and 2 to select the Album or Playlists c. Follow steps 3-6 above to change the album/playlists name After applied the new name, all tracks within this album/playlist will have the new album/playlists name ­ You may also use the 3 or 4 on Center or remote control to enter text: 3 Press it briefly to jump to previous character; press and hold it to fast scroll through the character list Press it briefly to jump to next character; press and hold it to fast scroll through the character list English 34 4 7. CD (on the Center only) You will be able to play the following on this system: ­ all pre-recorded audio CDs (CDDA) ­ all finalized audio CD-Rs and CD-RWs (12cm CD and 8cm 185 or 200 MB CD) ­ MP3WMA-CDs (CD-Rs/CD-RWs with MP3/WMA files) IMPORTANT!­ This system is designed for regular discs. Therefore, do not use any accessories such as disc stabilizer rings or disc treatment sheets, etc. About MP3/ WMA The music compression technology MP3 (MPEG1 Audio Layer 3) and WMA (Windows Media Audio) significantly reduces the digital data of an audio CD, while maintaining the sound quality. Windows Media Audio® is a registered trademark of Microsoft Corporation. Supported formats: ­ Disc format ISO9660, Joliet, UDF (created on Adaptec Direct CD v5. 0 and Nero Burning ROM UDF v5. 5) and multi-session CDs ­ MP3 bit rate (data rate): 32-320 Kbps and variable bit rate. ­ 12-cm 650Mb and 700Mb CD-R/ CD-RWs ­ Directory nesting up to a maximum of 8 levels ­ WMA v9 or earlier (max. 192Kbps cbr) Helpful hints: ­ Make sure that MP3 files end with a . mp3. extension, and WMA files end with a . wma extension. [. . . ] Download the firmware upgrade file specified for station. Follow the on-screen information to complete the rest steps. English 50 "No Disc"/ "Cannot read CD" is displayed Sound cannot be heard or is of poor quality. The disc skips tracks Sound skips during MP3/WMA playback Some WADM functions cannot be used Upgrading Station wirelessly failed. 137. Troubleshooting Backup function cannot work anymore. This is because the previously backed up file was deleted in Windows explorer. If you want to delete the back up file, please use WADM to manage. [. . . ]