User manual PHILIPS WAK3300

[. . . ] User manual 1 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug, proceed as follows: Remove fuse cover and fuse. Fix the new fuse which should be a BS1362 5-Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] appears when the set is searching for available networks The list of networks appears Follow the above-mentioned Step 3 If you are using a wired Access Point 1 On the WAK3300, press the navigation c. Select Auto (DHCP) Helpful hints: ­ You can also select Static IP and assign an IP address as prompted using the alphanumeric keys. Select No when the Enable Proxy Server screen appears e. Select Yes to apply the setting The WAK3300 will be restarted The main menu will appear when WAK3300 is connected to the UPnP server controls 3 or 4 and 2 to select UPnP Music Server Wired Ethernet will appear at the bottom of the screen Press 2 to enter the setup menu of Wired Ethernet a. Select No when the Enable Proxy Server screen appears c. Select Yes to apply the setting The WAK3300 will be restarted The main menu will appear when the WAK3300 is connected to the UPnP server 2 19 English 3 a. Press the navigation controls 3 or 4 and 2 4 To select another network Installation Installing FM antenna WARNING: - Never make or change connections when the power supply is switched on. WAK3300 comes with a pigtail FM antenna. When the set is switched to standby, it is still consuming some power. Remove the power plug from the wall socket to disconnect the set from the power supply completely. Using AC power 1 Make sure all connections have been made before switching on the power supply English 2 Connect the AC power cord to the wall socket. This switches on the power supply The type plate is located on the rear of the set. 1 Extend the pigtail antenna 2 Shift the antenna to different positions for 3 optimal reception (as far away as possible from the TV, VCR or other radiation sources) Fix the end of the pigtail to the wall For users in the U. K. : please follow the instructions on page 2. 20 Basic functions Accessing sources/settings from the main menu 1 All of the WAK3300's sources/settings are accessible from the main menu. Press HOME to enter the main menu Clock setting Adjust clock setting English 22 1 Enter the Setting menu from the main menu 2 Use the navigation controls 3 or 4 and 2 to select Day and Time followed by Time format or Set date & time 2 Press the navigation controls 3 or 4 and 2 to select your desired sound source or setting menu 3 Follow the steps 1-4 under Installation: Set clock to adjust the clock setting Display clock setting during playback Clock display as screen saver: In WAK3300, the clock display also serves as the screen saver. If no action is executed for 3 minutes (default) during WAK3300's playback, the clock display will appear as screen saver. To adjust the screen saver interval: Enter the Setting menu from the main menu select Display followed by Screen Saver In the Music menu, you can select your music sound source from the music library of either the Philips Wireless Music Center or the UPnP-enabled device In the Radio menu, you can select the FM radio sound source In the Alarm menu, you can set alarm timings, alarm sound source and alarm mode In the Setting menu, you can adjust or view the settings of the clock time, network, device, sound or display 1 2 Use the navigation controls 3 or 4 and 2 to period (in minutes): 3, 5, 10, 20 or 30 Check clock setting during playback: 3 Press 3 or 4 and 2 to select your desired time 1 Press and hold SNOOZE until the clock display appears Basic functions DSC (Digital Sound Control) DSC (or EQ) enables you to select predefined sound settings. (VOL) +/- buttons On the remote control, press DSC repeatedly until your desired sound setting appears on the display or MUTE 1 2 During playback, you can temporarily switch off the sound without switching off the set. Press MUTE to switch off the sound Playback continues without sound. To switch on the sound, press MUTE again or adjust the volume with VOL +. ­ You can also switch on the sound by activating MUSIC BROADCAST on the Center. 1 Enter the Setting menu from the main menu 2 Use the navigation controls 3 or 4 and 2 to select Sound followed by Set EQ 3 Press 3 or 4 and 2 to select from Pop (default), Rock, Classic, Jazz or Off Bass adjustment On the remote control, press DBB (Dynamic 1 2 Use the navigation controls 3 or 4 and 2 to select Sound Bass Boost) once or more to turn DBB on or off or Press HOME to enter the Setting menu 3 Press 3 or 4 and 2 to turn DBB on/off Helpful hint: - Only DBB on or DBB off will appear depending on the current DBB setting. 23 English Volume control 1 Check that playback has started 2 Adjust the volume using the VOLUME Sound control Basic functions Display adjustment You can adjust the contrast and brightness settings on the display. 1 Enter the Setting menu from the main menu 2 Use the navigation controls 3 or 4 and 2 to select Display Selecting languages 1 Enter the Setting menu from the main menu 2 Use the navigation controls 3 or 4 and 2 to select Display followed by Language English 3 Press 3 or 4 and 2 to select the desired language: English, Français, Español, Nederlands, Italiano or Deutsch Viewing device information 1 Enter the Setting menu from the main menu 3 Contrast: a. Press 3 or 4 and 2 to select Contrast The contrast setting menu appears b. Press 3 or 4 to increase or reduce the contrast 2 Use the navigation controls 3 or 4 and 2 to select Network followed by Device Status Brightness: a. Press 3 or 4 to increase or reduce the brightness or On the remote control, press DIM to adjust the display's brightness. 3 Press 1 or 2 repeatedly to view the desired device information 24 Music From the MUSIC source, you will be able to access the music library from the Philips Wireless Music Center or a UPnP-enabled music server, depending on the device WAK3300 has been connected to during the installation process. button again to resume playback. 7 To stop playback, press STOP 9 Playing MUSIC source 1 Check that the Philips Wireless Music Center or the UPnP music server has been switched on 2 On WAK3300, press MUSIC on the remote control to select music source The display shows the connected music source Press 2 to enter the music source The display shows and the music library on the music source Press the navigation controls 3 or 4 and 2 to select your option Press OK/2; to start playback album to start playback from the beginning of the selected item Playback starts from current selection The playback screen appears: 3 4 5 Helpful hints: - If no action is executed for 3 minutes (default) during playback, the clock display will appear as the screen saver. - When an action is detected, you will enter the playback/menu screen. Press OK/2; on a highlighted artist, genre or on the top: current clock/alarm/sleep timer settings in the middle: current track name, artist, album name, play mode and sound settings at the bottom: playback status (e. g 2 play, ; pause), elapsed playing time, total playing time of current track) 25 English About MUSIC source 6 To pause playback, press OK/2;. Press the Music Selecting and searching Select a different option Select a track in current album during playback English 1 When in playback screen, press the navigation 2 3 control 3 to return to the previous option list If necessary, press 1 repeatedly to enter previous option lists Press 3 or 4 repeatedly and 2 to select an option 1 In the playback screen, press the navigation controls 1 or 2 briefly and repeatedly to select the previous or the subsequent track Fast scroll an option list To quickly find your desired option (e. g. [. . . ] Edit the key using the alphanumeric keys or the 3/4 key c. Select an active key Helpful hint: ­ To change the encryption key of the preset connection profile, also enable Profile Management. 5 After the settings have been applied, the set will restart itself automatically 37 English 5 Press 3 or 4 and 2 to select an empty preset Change the encryption key of a connection profile Device setting Setting sleep timer You can preset a certain period of time after which the set will auotmatically switch to standby mode. Reset If desired, you can restore your WAK3300 to its default settings (including the network setting). Reset WAK3300: ­ To change WAK3300's connected music source (e. g. from Philips Music Center to UPnP Music Server or vice versa) ­ To re-establish the Wi-Fi connection between WAK3300 and Philips Wireless Music Center. English On the remote control, a. [. . . ]