User manual PHILIPS WAS5

[. . . ] Wireless Music Station WAS5 User manual Manuel d'utilisation Manual del usuario Benutzerhandbuch Gebruikershandleiding Manuale per l'utente Användarhandböckerna Brugermanual Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Norge Typeskilt finnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten. [. . . ] No naked flame sources, such as lighted candles, should be placed on the apparatus. The mechanical parts of the set contain selflubricating bearings and must not be oiled or lubricated. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. 9 English Controls (illustrations on page 3) English ­ ­ ­ Controls on the Station ( front panel) 1 STANDBY-ON/ ECO POWER press briefly to switch Station on or to standby mode; press and hold to switch Station to power-saving mode or on Red indicator: lights up red when the set is switched to Standby mode or power-saving mode MUSIC FOLLOWS ME HD: moves music playback between Center and Station or between Station and Station IR sensor for the infrared remote control Helpful hints: Always point the remote control towards this sensor. It may result in improper display on your Center's 2-way remote control. ­ Keep Stations adequately apart or in different angles (e. g. in different rooms blocked by one wall). in the same room), your Center's remote control is powerful enough to simultaneously operate several Stations, which may also result in improper display on the 2-way remote control. Setting up Wi-Fi connection between Center and Station Up to 5 stations can be connected to a WAC5 Center. 1 2 3 On Center Connect the Center to power supply Switch on WAC5 Center and select HD source To select Add New Station on Center a. Press and hold STOP · MENU to enter the MENU screen (or on remote control, press MENU) b. Use the navigation controls 3 or 4 and 2 to enter Station Mgnt menu c. In Station Mgnt menu, use the navigation controls 3 or 4 and 2 to select You will enter the Installation Mode. Searching for the station star ts Playback stops on the previously associated Station if you are playing the HD source On Station Connect the station to power supply Select your desired language: English, Français, Español, Nederlands, Italiano and Deutsch "Searching for Center" appears The set enters Installation Mode The search for Center starts. On Center 4 5 Mounting stand onto Station WAS5 Station is equipped with a stand. To mount the stand onto your Station, 1 2 6 Align the supplied stand to the slot at Station's bottom Insert the stand into the slot firmly Press STOP/Ç on the Center when all your stations are found IMPORTANT!Your Center and Station should never be blocked by 2 or more walls. ­ Avoid placing the sets close to large metal objects. ­ For better Wi-Fi reception, turn the Wi-Fi antenna, or adjust the location of your Center and Station. ­ indicates maximum reception ­ indicates no reception Helpful hints: ­ Once inserted, the stand is undetachable. 13 English Installation If there is interference in the neighborhood, the set may pause during playback or respond slowly to your operation. In such cases ­ Use the WEP* key when connecting your Center and Station to an existing wireless PC network. See the manual Connect to your PC: Option 2. ­ Change the operating channel of your Center and Station when connecting them to an existing wireless PC network. [. . . ] 0. 5% Channel difference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3dB Channel separation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60dB S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 dBA (IEC) Wireless Wireless standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]