User manual PHILIPS WAS7000

[. . . ] Wireless Music Station WAS7000 User manual Manuel d'utilisation User manual English 2 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13Amp plug. To change a fuse in this type of plug, proceed as follows: Remove fuse cover and fuse. Fix the new fuse which should be a BS1362 5Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug should be fitted in its place. If the mains plug contains a fuse, it should have a value of 5 Amp. [. . . ] 6. 6. 1 MUSIC FOLLOWS ME As you move around at home, let the music move with you between the Center and Station or between Stations. 5 To stop MUSIC FOLLOWS ME, press STOPÇon the destination unit Helpful hints: After activating MUSIC FOLLOWS ME on the destination unit: ­ make sure that the source unit is switched on or is already in standby mode. ­ you can select other tracks or source for playback. 26 6. HD(Located on Center) English 4 6. 6. 2 MUSIC BROADCAST MUSIC BROADCAST allows you to broadcast music from Center to Stations. On the Stations To stop MUSIC BROADCAST, press STOPÇ on the Center Helpful hints: ­ To exit MUSIC BROADCAST on a Station, press STOPÇ on the Station. To broadcast music to the Station again, press STOPÇ on the Center, and then activate MUSIC BROADCAST on the Center again. ­ MUSIC BROADCAST will also stop when: ­ the Center is put to standby mode or power-saving mode; ­ the selected album or playlist has reached the end. 6. 7 Viewing system information 1 Check that the Station is switched on or is already in standby mode (see 5. Basic functions) On the Center 1 2 3 Select Information on the Station a. Press the navigation controls 3 or 4 and 2 to enter Information menu The display shows: System, WiFi and Ethernet In HD source, select and play the album or playlist that you wish to broadcast to the Stations (see 6. 2: Selecting and searching) Press MUSIC BROADCAST to activate The icon appears on the Center and Stations. A 5-second countdown starts. 2 Press the navigation controls 3 or 4 and 2 to select System The following information will be shown on the display: the name of the Station, firmware version On the Center and Stations: The selected music starts to play simultaneously after the 5second countdown. for illustration only 27 7. FM radio 7. 1 Tuning to radio stations 1 2 3 Connect the supplied FM wire antenna to the Station (see 3. Installation) Check that the set is switched on or in standby mode (see 5. Basic functions) Press SOURCE once or more times to select Radio Playback screen appears. Display shows: Radio, the radio station frequency and a preset number (if already programmed) Press and hold 3 or 4 until the frequency in the display starts running. 7. 2 Storing preset radio stations You can store up to 60 preset radio stations in the memory. 7. 2. 1 Autostore: automatic programming Autostore automatically starts programming radio stations from Preset 1. Available stations are programmed in the order of radio frequencies: RDS stations followed by FM stations. A maximum of 10 RDS stations will be stored (from Preset 01 to Preset 10). English 4 1 To select Autostore radio, a. Use the navigation controls 3 or 4 and 2 to select Autostore radio Display shows: Autostore Please wait. . . After all the stations are stored, the first autostored preset station will then play automatically. 7. 2. 2 Manual programming 1 The radio automatically tunes to a station of sufficient reception. Display shows Searching during automatic tuning If a station is received in stereo, is shown When you are receiving an RDS station, is shown Tune to your desired radio station (see 7. 1 Tuning to radio stations). The display shows: 2 PROGRAM REPEAT SHUFFLE 1 SAME GENRE 2 abc 5 jkl DIM 3 6 mno RDS/NEWS 5 Repeat Step 3 if necessary until you find the desired radio station To tune to a weak station, press 3 or 4 briefly and repeatedly until optimal reception is detected. SAME ARTIST INCR. SURR. 4 ghi SLEEP MENU VIEW OK SCROLL VOL 28 7. FM radio 4 You can activate NEWS while listening to HD, USB, UPnP, or AUX source on WAS7000. The set will tune to the news radio station if the related signals are received from a RDS station. 7. 4. 1 Activating NEWS Press OK Current radio station is stored to that preset location. OK During playback in HD, USB, UPnP, or AUX source, press RDS/NEWS on the remote control. 4 ghi SLEEP 5 jkl DIM 6 mno RDS/NEWS 7. 2. 3 To listen to a preset station 7 pqrs MUSIC BROADCAST 8 tuv 9 wxyz MUSIC FOLLOWS ME 1 2 Press 1 to enter the list of preset stations Use the navigation controls 3 or 4 followed by 2 to select the desired station. MENU VIEW 0 The icon appears and NEWS ON is displayed briefly Playback continues when the set scans the first 10 preset stations When news transmission is detected, the set will switch to the news station. The icon starts flashing Helpful hints: ­ Make sure that you have stored RDS stations in the first 10 preset locations (see 7. 2. 1 Autostore: automatic programming). ­ If no news transmission is detected during the scanning of the set, the icon disappears and NO RDS NEWS is displayed. [. . . ] Only completely recorded MP3/WMA files can be found and played by WAS7000. Check if the file has been completely recorded. DRM-protected WMA files cannot be played on WAS7000. If the signal is too weak, adjust the antenna or connect an external antenna for better reception. [. . . ]