User manual PHILIPS XL4951S

[. . . ] Always there to help you Register your product and get support at www. philips. com/support Question?Contact Philips XL490 XL495 User manual Contents 1 Important safety instructions 2 Your phone 3 5 5 6 7 Switch between uppercase and lowercase 17 7 Phonebook What is in the box Overview of the phone Overview of the base station 3 Get started 8 Connect the base station 8 Install the handset 8 Configure your phone (country dependent) 9 Change the remote access PIN code (for XL495) 9 Charge the handset 10 Check the battery level 10 What is standby mode? 10 Display icons 10 Check the signal strength 11 Switch the handset on or off 11 12 12 12 13 13 13 13 13 13 13 14 15 15 15 17 17 Direct keys Direct access memories View the phonebook Search a record Call from the phonebook Access the phonebook during a call Add a record Edit a record Delete a record Delete all records 18 18 18 18 18 19 19 19 19 19 20 21 21 21 21 21 22 22 23 23 23 23 23 23 23 24 24 25 25 26 26 26 26 27 28 28 28 8 Call log Call list type View the call records Save a call record to the phonebook Return a call Delete a call record Delete all call records 9 Redial list 4 Calls Make a call Answer a call End a call Adjust the earpiece/speaker volume Mute the microphone Turn the speaker on or off Make a second call Answer a second call Switch between two calls Make a conference call with the external callers View the redial records Save a redial record to the phonebook Redial a call Access the redial list during a call Delete a redial record Delete all redial records 10 Phone settings 5 Intercom and conference calls Make a call to another handset Make a conference call Sound settings Eco mode ECO+ mode Name the handset Set the date and time Set the display language Auto answer Set the handset LED indicator behavior 6 Text and numbers 11 Alarm clock Enter text and numbers Set the alarm Turn off the alarm EN 1 12 Telephone answering machine 29 Turn the answering machine on or off 29 Family notes 29 Set the answering machine language 29 Set the answer mode 30 Announcements 30 Incoming messages 30 Remote access 32 34 34 34 34 35 36 36 36 36 37 37 37 38 39 13 Services Call list type Auto conference Call barring Call blocking Network type Auto prefix Select the recall duration Dial mode Auto clock Register additional handsets Unregister the handsets Restore default settings 14 Technical data 15 Notice 40 Declaration of conformity 40 Use GAP standard compliance 40 Compliance with EMF 40 Disposal of your old product and battery 40 42 42 44 46 16 Appendix Text and number input tables 17 Frequently asked questions 18 Index 2 EN 1 Important safety instructions Power requirements ? This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost. ? The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60950. Warning ?? [. . . ] Select [On]/[Off], then press [OK] to confirm. The setting is saved. 1 2 3 4 Select [Menu] > [Phone setup] > [Sounds] > [Silent mode], then press [OK] to confirm. Select [On/off] > [On]/[Off], then press [OK] to confirm. Select [Start & end], then press [OK] to confirm. Set the time, then press [OK] to confirm. is displayed. Eco mode The ECO mode reduces the transmission power of the handset and base station when you are on a call or when the phone is in standby mode. 1 2 Select [Menu] > [Phone setup] > [Eco mode], then press [OK] to confirm. Select [On]/[Off], and press [OK] to confirm. ECO is displayed in standby mode. Note Set the key tone Key tone is the sound made when you press a key on the handset. 1 2 Select [Menu] > [Phone setup] > [Sounds] > [Key tone], then press [OK] to confirm. Select [On]/[Off], then press [OK] to confirm. When ECO mode is set to [On], the connection range between the handset and the base station can be reduced. Set the docking tone Docking tone is the sound made when you place the handset on the base station or charger. ECO+ mode When the ECO+ mode is activated, it eliminates the radiation of the handset and base station in standby mode. 1 Select [Menu] > [Phone setup] > [Sounds] > [Docking tone], then press [OK] to confirm. 1 Select [Menu] > [Phone setup] >Eco+ mode , then press [OK] to confirm. EN 25 2 Select [On]/[Off], and press [OK] to confirm. ECO+ is displayed in standby mode after a while. Note 2 3 Enter or edit the name. The setting is saved. Set the date and time For information, see 'Set the date and time (see 'Set the date and time' on page 9)'. ??Make sure that all the handsets registered to the base station are XL490/XL495 in order to have the ECO+ feature functioning properly. When ECO+ is activated, the standby time is reduced. This is because in ECO+ mode the base station is not transmitting any signal in standby mode; therefore the handset needs to ?listen?more frequently for signals from the base station to detect incoming calls or other requests from the base station. The time it takes for the handset to access features like call setup, call log, paging, and phonebook browsing is also delayed. The handset will not alert you to link loss in case of power loss or moving out of range. Set the display language Note ??This feature only applies to models with multiple??Languages available vary from country to country. language support. The following table shows you the current status of the handset screen with different ECO mode and ECO+ mode settings. ECO mode [Off] [Off] ECO+ mode [Off] [On] Handset icon display and are off. 1 2 Select [Menu] > [Phone setup] > [Language], then press [OK] to confirm. Select a language, then press [OK] to confirm. [. . . ] I am a hearing aid user, what do I do to improve the sound volume?This enables the phone to couple with the hearing aid device to amplify the sound and reduce noise interference (see 'Set the hearing aid compatibility' on page 24). I cannot change the settings of my voice mail, what do I do?The voice mail service is managed by your service provider but not the phone itself. [. . . ]